Cisco 7940 and 7960 as SIP phone

From Teknologisk videncenter
Revision as of 06:05, 11 October 2010 by Heth (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  • To perform a soft reset of the Cisco 7940/7960 phone; hold the *, 6 and <Settings> key at the same time
Unlock your phone by pressing **# (for old firmware) or selecting unlock config from the config menu and type in the password (default is ‘cisco‘)
  • To help debug SIP connections:
    • Telnet to the Cisco 7940/7960 phone (You can find the IP address by looking at the network settings on the phone)
    • Login using the password you set in the SIPDefault.cnf file - cisco
To watch the sip messages, type: debug sip-messages
To turn off, type: tty mon 0
  • To see errors in the *.cfg file, type: show status
Note: You will see the following messages and can ignore them…
W351 unprovisioned proxy_emergency
W350 unprovisioned proxy_backup

Links

Retrieved from "http://mars.merhot.dk/w/index.php?title=Cisco_7940_and_7960_as_SIP_phone&oldid=15174"