DHCPv6 Cisco IOS
From Teknologisk videncenter
This article is under development....
This article will be written when the author gets experience using DHCPv6. (Hopefully shortly :-)
DHCPv6 multicast
- Local link DHCPv6 multicast FF02::1:2
- Entire site DHCPv6 multicast FF05::1:3
DHCPv6 other-config-flag
Node will autoconfigure its IPv6 address using |Stateless Autoconfiguration. The ipv6 nd other-config-flag teels the node to collect remaining setup from DHCPv6- in this case DNS-server IP.
ipv6 dhcp pool ROOM308
dns-server 2001:16D8:DD85:B000:20C:29FF:FE84:CC63
!
interface FastEthernet0/1
ipv6 address 2001:16D8:DD85:B000::1/64
ipv6 enable
ipv6 nd other-config-flag
ipv6 dhcp server ROOM308
!DHCPv6 Relay agent
On local link
R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination FE80::250:A2FF:FEBF:A056 fastethernet0/1</input>To global unicast
R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination 2001:16D8:DD85:146::2</input>
R1(config-if)#<input>ipv6 dhcp relay source-interface loopback 0</input>To Multicast All Site Local DHCPv6 servers
R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination FF05::1:3</input>