Grove LCD RGB Backlight 16x2

LCD with RGB Backlight

Links

• Seeed studio Grove LCD Backlight homepage
• NXP PCA9632 datasheet (RGB Backlight control chip)
• AiP31068 datasheet (LCD Display control chip)

Eksempel på funktionalitet

#!/bin/bash
# Hex codes found with
#  echo Viborg | od -x --endian=big
#  0000000 5669 626f 7267 0a00


# i2cset -y <i2cBUS> <i2cADDRESS> <Control Byte> <Data byte>
#  Control byte bits Co RS 0 0   0 0 0 0 ( 0x80 = Co, 0x40 = RS, 0xc0 = Co and RS)
#    Co:  0 = Last Control Byte - 1 = Another Control Byte follows
#    RS:  0 = Following data byte is a command - 1 = following data byte is data
#Function set 0010 1000 // 2 line mode and 5x8
i2cset -y 2 0x3e 0x00 0x28
#Display on/off control 0000 1110 // Diplay on cursor on blink off
i2cset -y 2 0x3e 0x00 0x0D
#Display clear
i2cset -y 2 0x3e 0x00 0x01
#Entry mode set 0000 0110
i2cset -y 2 0x3e 0x00 0x06
#i2cset -y 2 0x3e 0x20 0x06
#i2cset -y 2 0x3e 0x8 0x06
i2cset -y 2 0x3e 0x00 0x02
# 1xxx xxxx = set DDRAM adress = 1000 0000 to 1011 1111
#  first line (1000 0000 to 1000 1111 possible on 16 characters line) = 0x80 to 0x8f
#  second  line (1100 0000 to 1100 1111 possible on 16 characters line) = 0xC0 to 0xCf
i2cset -y 2 0x3e 0x00 0x84 # 5th character on line 1
#Display Mercantec
i2cset -y 2 0x3e 0x40 0x4d
i2cset -y 2 0x3e 0x40 0x65
i2cset -y 2 0x3e 0x40 0x72
i2cset -y 2 0x3e 0x40 0x63
i2cset -y 2 0x3e 0x40 0x61
i2cset -y 2 0x3e 0x40 0x6e
i2cset -y 2 0x3e 0x40 0x74
i2cset -y 2 0x3e 0x40 0x65
i2cset -y 2 0x3e 0x40 0x63
#Display Viborg in middle of second line
i2cset -y 2 0x3e 0x00 0xC5 # 5th character on line 2
i2cset -y 2 0x3e 0x40 0x56
i2cset -y 2 0x3e 0x40 0x69
i2cset -y 2 0x3e 0x40 0x62
i2cset -y 2 0x3e 0x40 0x6f
i2cset -y 2 0x3e 0x40 0x72
i2cset -y 2 0x3e 0x40 0x67