Difference between revisions of "M-BUS"

From Teknologisk videncenter
Jump to: navigation, search
m (Links)
m (Links)
Line 22: Line 22:
  
 
==Links==
 
==Links==
*[https://ozeki.hu/attachments/5923/M-Bus_datasheet.PDF M-BUS Documentation] (Loads PDF) - Same as m-bus.com documentation
+
*[https://m-bus.com/downloads M-BUS Documentation] (Loads PDF)
 
*[[m-bus Linux]]
 
*[[m-bus Linux]]
 
*https://m-bus.com/  (Good documentation)
 
*https://m-bus.com/  (Good documentation)

Revision as of 06:09, 28 January 2023

Comment Meter-BUS or short M-BUS which is designed mainly for remote reading of water meter, gas or electricity meters - not to be confused with Smart-BUS or short S-BUS is designed mainly for home automation

Physical layer

  • Master to slave: 36 Volt = 1 - 24 Volt = 0
  • Slave to Master: Draws < 1,5 mA = 1 - draws11-20 mA = 0
  • Baudrate: 300 - 9600
  • Cable: Two-wire standard telephone cable (JYStY N20.8 mm)
  • Max cable length: 350 Meter (Lower baud rates up to 1000 Meter - but restricted power not below 12 V max capacitance 180 nF)
  • Power: Up to 27 Watt through the cable = 0,75 A
  • Slaves: Up to 250 in a single segment
  • Repeater: Also called a master and typically is an M-BUS to RS232 converter attached to a host
  • Plug: No standard
  • M-BUS slave example: MIKROE-4137 M-BUS SLAVE CLICK
  • M-BUS master example: MIKROE-3880 M-BUS MASTER CLICK
  • OMS-Group - Extension of M-BUS and wM-BUS

Links