BO CCNA Course/coursematerials/Basic Switching Setup

From Teknologisk videncenter
Jump to: navigation, search

Configure the following setup in Packet Tracer

Switch Setup
  1. Connect the devices as shown on the diagram
  2. Configure IP address on all the devices, and test connectivity
  3. Configure the router to be the default gateway of the switch
  4. Configure a password on the switch & router
  5. Configure telnet access to the switch and router
  6. configure Login and MOTD banner on the devices
  7. Set the correct clock on the devices
  8. Create VLAN 99 and name it MGMT
  9. Configure all the switch ports to be access ports in VLAN 99
  10. Configure port-security on the switch to only allow 1 MAC address, and make it sticky. Violation mode should be shutdown.
    1. Try to reconnect the computers and verify that port-security is enabled
Retrieved from "http://mars.merhot.dk/w/index.php?title=BO_CCNA_Course/coursematerials/Basic_Switching_Setup&oldid=23115"