Cluster der kan alt/Install DNS server
From Teknologisk videncenter
Contents
Install DNS Server
Install DNS server
sudo apt-get install bind9
Configure DNS Server
1. Add domain zone
Edit /etc/bind/named.conf.local
sudo nano /etc/bind/named.conf.local
Add the text below to the bottom of the file
# Domain Zone
zone "dka.local." {
type master;
file "/etc/bind/zones/dka.local.db";
};
# For reverse DNS
zone "0.0.10.in-addr.arpa" {
type master;
file "/etc/bind/zones/rev.0.0.10.in-addr.arpa.db";
};
2. Add DNS servers from your ISP
Enter the named.conf.options file
sudo nano /etc/bind/named.conf.options
Comment out the following lines
dnssec-validation auto;
auth-nxdomain no; # conform to RFC1035
listen-on-v6 { any; };
Add the following to the bottom of the file, just above '};'
forwarders {
172.16.4.77; # Mercantec DNS
};
auth-nxdomain no; # conform to RFC1035
listen-on-v6 { any; };
listen-on { any; };
allow-query { 127.0.0.1; 172.16.4.77/24; 10.0.0.0/24; };
NOTE: Be aware of which IP segment you are in. 172.16.4.77 = Hovedforløb 172.16.2.50,172.16.2.51 = Grundforløb
3. Modify the resolv.conf file
Edit /etc/resolvconf/resolv.conf.d/base file, and add the following lines. Replace 'dka.local' with your own domain.
nameserver 127.0.0.1
nameserver 10.0.0.1
nameserver 172.16.4.77
domain dka.local
search dka.local
You may want to lock down the resolv.conf file, making it immutable.
sudo chattr -f +i /etc/resolv.conf
Any problems with the resolv.conf file, look here
4. Define zones
First make the directory /etc/bind/zones
sudo mkdir /etc/bind/zones
Second make the file dka.local.db (replace with your own domain)
sudo nano /etc/bind/zones/dka.local.db
; BIND data file for local loopback interface
;
$TTL 604800
@ IN SOA ns.dka.local. root.dka.local. (
8 ; Serial
604800 ; Refresh
86400 ; Retry
2419200 ; Expire
604800 ) ; Negative Cache TTL
;
@ IN NS ns.dka.local.
ns IN A 10.0.0.1
cluster IN A 10.0.0.1
node1 IN A 10.0.0.11
node2 IN A 10.0.0.12
node3 IN A 10.0.0.13
node4 IN A 10.0.0.14
Note: TTL is set for 1 week.
5. Create a “rev.0.0.10.in-addr.arpa.db” file for reverse lookup
Create the rev.0.0.10.in-addr.arpa.db filesudo nano /etc/bind/zones/rev.0.0.10.in-addr.arpa.db
$TTL 3D
@ IN SOA ns.dka.local. admin.dka.local. (
2007062001
28800
604800
604800
86400
)
IN NS ns.dka.local.
1 IN PTR ns.dka.local.
1 IN PTR cluster.dka.local.
11 IN PTR node1.dka.local.
12 IN PTR node2.dka.local.
13 IN PTR node3.dka.local.
14 IN PTR node4.dka.local.
6. Verify domain and DNS entries
Restart the network servicesudo service bind9 restart
Dig
$ dig dka.local
Nslookup
nslookup ns