IPMI/FreeBSD
From Teknologisk videncenter
< IPMI(Redirected from FreeBSD ipmi)
Contents
IPMI: Intelligent Platform Management Interface
Fra FreeBSD version 6.2[1] er impi indbygget i base systemet. Bemærk IPMI er et indbygget overvågningssytem på motherboardet. Oftest fundet på server motherboard.
Enable IPMI
On-the-fly
[root@mars run]#<input>kldload ipmi</input>
Hvis IPMI modulet ikke loader, er IPMI sikkert ikke indbygget på dit motherboard. Automatic load when booting
[root@mars run]#<input>echo 'ipmi_load="YES"' >> /boot/loader.conf</input>
Using ipmi
For at bruge ipmi skal ipmitool installeres som package eller via ports. herunder vist installation af package
[root@mars run]#<input>pkg_add -r ipmitool</input>
Eksempel
[root@mars run]#<input>ipmitool chassis status</input>
System Power : on
Power Overload : false
Power Interlock : inactive
Main Power Fault : false
Power Control Fault : false
Power Restore Policy : previous
Last Power Event : ac-failed
Chassis Intrusion : active
Front-Panel Lockout : inactive
Drive Fault : false
Cooling/Fan Fault : false
Hardware (FRU: Field Replaceable Units)
[root@mars run]#<input>ipmitool fru</input>
FRU Device Description : Builtin FRU Device (ID 0)
Chassis Type : Tower
Board Mfg Date : Tue Jan 13 08:35:00 2004
Board Mfg : Intel
Board Product : SE7501HG2
Board Serial : KRH140200266
Board Part Number : A95718-306
Product Manufacturer : Intel
Sensors.
[root@mars run]#<input>ipmitool sdr</input>
Baseboard 1.2V | 1.20 Volts | ok
Baseboard 1.25V | 1.25 Volts | ok
Baseboard 1.8V | 1.78 Volts | ok
Baseboard 1.8VSB | 1.80 Volts | ok
<notice>.....</notice>
System Event Log (SEL)
ipmitool <input>sel time get</input>
01/07/2011 15:26:00
[root@mars2 ~]# <input>ipmitool sel clear</input>
Clearing SEL. Please allow a few seconds to erase.
[root@mars2 ~]# <input>ipmitool sel list</input>
1 | 01/07/2011 | 15:20:14 | Unknown #0xb6 | Upper Non-critical going high
2 | 01/07/2011 | 15:20:14 | Unknown #0xb6 | Upper Critical going high
3 | 01/07/2011 | 15:20:14 | Unknown #0xb6 | Upper Non-recoverable going high
[root@mars2 ~]# <input>ipmitool sel get 1</input>
SEL Record ID : 0001
Record Type : 02
Timestamp : 01/07/2011 15:20:14
Generator ID : 0020
EvM Revision : 04
Sensor Type : Unknown
Sensor Number : b6
Event Type : Threshold
<notice>....</notice>