@@ Line 1: / Line 1: @@
-=== IP PLAN  ===
-{|
-|-
-[[Image:Ipadr.jpg|thumb|left|800px|]]
-[[Image:Ipadr2.jpg|thumb|left|800px|]]
-[[Image:Ipadr3.jpg|thumb|left|800px|]]
-[[Image:Ipadr4.jpg|thumb|left|800px|]]
-[[Image:Ipadr5.jpg|thumb|left|800px|]]
-|}
-<BR>
 === Netværks tegning  ===
@@ Line 79: / Line 62: @@
 Extra: der skal købes 10GB fibermoduler(SFP) til alle fiberlinks, der skal også IOS på der understøtter BGP, OSPF og hvad vi ellers har med i vores setup
+Der skal laves UPS backup strøm til alle vores krydsfelter/core så IP telefoni samt kritiske systemer kører i tilfælde af strømnedbrud
+=== IP PLAN  ===
+{|
+|[[Image:Ipadr.jpg|thumb|left|800px|]]
+|-
+|[[Image:Ipadr2.jpg|thumb|left|800px|]]
+|-
+|[[Image:Ipadr3.jpg|thumb|left|800px|]]
+|-
+|[[Image:Ipadr4.jpg|thumb|left|800px|]]
+|-
+|[[Image:Ipadr5.jpg|thumb|left|800px|]]
+|}
 === configs  ===
-http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfbgp.html http://www.cisco.com/en/US/docs/ios/12_0/np1/configuration/guide/1cospf.html http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/configuration/guide/l3_int.html
+===bgp_conf_vi01mp11===
+interface loopback0
+ip address 192.168.0.2 255.255.255.255
+!
+interface FastEthernet1/3
+description Backbone to VI01MP10
+ip address 10.0.10.70 255.255.255.252
+!
+interface GI1/4
+description "MPLS" til Horsens
+ip address x.x.x.x x.x.x.x
+!
+interface GI1/1
+description Backbone til VI01CO10
+ip address 10.0.10.58 255.255.255.252
+!
+interface GI1/2
+description Backbone til VI01CO11
+ip address 10.0.10.50 255.255.255.252
+!
+router ospf 1
+network 10.0.10.70 0.0.0.0 area 0
+network 10.0.10.58 0.0.0.0 area 0
+network 10.0.10.50 0.0.0.0 area 0
+!
+router bgp 700
+no synchronization
+redistribute ospf 1 route-map LAN_Subnets
+neighbor 192.168.0.1 remote-as 700
+neighbor 192.168.0.1 update source loopback0
+neighbor x.x.x.1(ISP) remote-as xxx(ISP)
+neighbor x.x.x.1(ISP)update source loopback0
+no auto-summary
+!
+access-list 10 permit 10.0.0.0 0.31.255.255
+!
+route-map LAN_Subnets permit 10
+match ip address 10
+set metric 100
+===bgp_config_vi01mp10===
+interface loopback0
+ip address 192.168.0.1 255.255.255.255
+!
+interface FastEthernet1/3
+description Backbone to VI01MP11
+ip address 10.0.10.69 255.255.255.252
+!
+interface GI1/4
+description "MPLS" til Horsens
+ip address x.x.x.x x.x.x.x
+!
+interface GI1/1
+description Backbone til VI01CO10
+ip address 10.0.10.54 255.255.255.252
+!
+interface GI1/2
+description Backbone til VI01CO11
+ip address 10.0.10.46 255.255.255.252
+!
+router ospf 1
+network 10.0.10.69 0.0.0.0 area 0
+network 10.0.10.54 0.0.0.0 area 0
+network 10.0.10.46 0.0.0.0 area 0
+!
+router bgp 700
+no synchronization
+redistribute ospf 1 route-map LAN_Subnets
+neighbor 192.168.0.2 remote-as 700
+neighbor 192.168.0.2 update source loopback0
+neighbor x.x.x.2(ISP) remote-as xxx(ISP)
+neighbor x.x.x.2(ISP) update source loopback0
+no auto-summary
+!
+access-list 10 permit 10.0.0.0 0.31.255.255
+!
+route-map LAN_Subnets permit 10
+match ip address 10
+set metric 100
+http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfbgp.html
+http://www.cisco.com/en/US/docs/ios/12_0/np1/configuration/guide/1cospf.html http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/configuration/guide/l3_int.html

Difference between revisions of "CCDP-Campus Viborg/Opgave 3/Gruppe14"

Latest revision as of 11:26, 22 September 2010

Contents

Netværks tegning

Navngivning

Udstyr

IP PLAN

configs

bgp_conf_vi01mp11

bgp_config_vi01mp10