Difference between revisions of "TDC Juniper"
From Teknologisk videncenter
m (→Goodies) |
m (→Goodies) |
||
| Line 107: | Line 107: | ||
No-Keepalive på Juniper | No-Keepalive på Juniper | ||
<pre> | <pre> | ||
| − | set gigether-options loopback | + | [edit interfaces ge-0/0/6] |
| + | root@SRX240# set gigether-options loopback | ||
</pre> | </pre> | ||
Revision as of 09:50, 6 December 2011
Contents
Juniper
- Juniper Basics
- Generel setup
- Generel udvidet setup
- Statisk Routing
- Dynamisk Routing
- Virtual Routers
- Sikkerhed
- RPM
Opgaver
- Opgave 1 - Basis Konfig
- Opgave 2 - Routing
- Opgave 3 - BGP Routing
- Opgave 4 - Virtual Routers
- Opgave 5 - Sikkerhed
Bilag
Goodies
IS-IS opsætning
[edit protocols isis]
rael@SRX240#show
interface ge-0/0/0 {
level 2 disable; # Som default kører interfaces L1 og L2 så derfor slår vi L2 Hello's fra.
}
interface ge-0/0/1 {
level 2 disable;
}
[edit interfaces]
rael@SRX240#show
interface ge-0/0/0 {
unit 0 {
family iso;
family inet address 10.0.0.1/24;
}
}
lo0 {
unit 0 {
family inet address 192.168.0.1/32;
family iso address 49.0001.1921.6800.0001.00;
}
}
NetFlow opsætning
interfaces {
ge-0/1/0 {
unit 0 {
family inet {
filter {
input all;
output all;
}
address 192.168.1.1/24;
}
}
}
}
firewall {
filter all {
term all {
then {
sample;
accept;
}
}
}
}
forwarding-options {
sampling {
input {
family inet {
rate 100;
}
}
output {
cflowd 192.168.1.100 {
port 2000;
version 5;
}
}
}
}
IPv6 Default GW
[edit routing-options]
root@SRX240# show
rib inet6.0 {
static {
route ::/0 next-hop 2001:16d8:dd85:146::1;
}
}
No-Keepalive på Juniper
[edit interfaces ge-0/0/6] root@SRX240# set gigether-options loopback