Difference between revisions of "Cluster der kan alt/PXE and Kickstart"
From Teknologisk videncenter
(→Kickstart) |
m (→Netinstaller) |
||
Line 10: | Line 10: | ||
<source lang=cli> | <source lang=cli> | ||
cd /var/lib/tftpboot/ | cd /var/lib/tftpboot/ | ||
− | wget http://archive.ubuntu.com/ubuntu/dists/ | + | wget http://archive.ubuntu.com/ubuntu/dists/<b>trusty</b>/main/installer-amd64/current/images/netboot/netboot.tar.gz |
tar -xvzf netboot.tar.gz | tar -xvzf netboot.tar.gz | ||
</source> | </source> | ||
+ | Note: trusty = ubuntu 14.04, precise = ubuntu 12.04 | ||
===Set the kickstartfile as default, and the timer to 5 sec=== | ===Set the kickstartfile as default, and the timer to 5 sec=== |
Revision as of 16:29, 19 October 2014
Contents
PXE
Install tftp server
apt-get install tftpd-hpa
Netinstaller
Download and install pxelinux to tftp root:
cd /var/lib/tftpboot/
wget http://archive.ubuntu.com/ubuntu/dists/<b>trusty</b>/main/installer-amd64/current/images/netboot/netboot.tar.gz
tar -xvzf netboot.tar.gz
Note: trusty = ubuntu 14.04, precise = ubuntu 12.04
Set the kickstartfile as default, and the timer to 5 sec
Enter the txt.cfg file
sudo nano /var/lib/tftpboot/ubuntu-installer/amd64/boot-screens/txt.cfg
Rename the "default install" line to "default unattended" so the the unattended kickstart file will be executed by default
Insert the "label unattended" section in the bottom ofthe file
label unattended
menu label Install ^Unattended
kernel ubuntu-installer/amd64/linux
append vga=768 initrd=ubuntu-installer/amd64/initrd.gz ks=http://10.0.0.1/kickstart/ks.cfg
Change the timeout value to 50 in the default file.
sudo nano /var/lib/tftpboot/pxelinux.cfg/default
Kickstart
Install the http server lighttpd
sudo apt-get install lighttpd
Create the ks.cfg file
nano /var/www/kickstart/ks.cfg
The kickstart file
Copy/paste the following text to the ks.cfg file. (Make your own changes like ip addresses and domain name, so it will fit your setup.)
#Generated by Kickstart Configurator
#platform=x86
#################
#Node configuration
#################
#System language
lang da_DK
#Language modules to install
langsupport us_EN
#System keyboard
keyboard dk
#System mouse
mouse
#System timezone
timezone Europe/Copenhagen
#################
#User configuration
#################
#Root password
rootpw cluster
#Initial user
user cluster --fullname "cluster" --password cluster
#Reboot after installation
reboot
#Use text mode install
text
#Install OS instead of upgrade
install
#Use Web installation
url --url http://mirror.tekkom.dk/ubuntu/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#################
#Disk configuration
#################
#Disk partitioning information
part / --fstype ext4 --size 1024
part /boot --fstype ext4 --size 512
part /home --fstype ext4 --size 1024
part /var --fstype ext4 --size 3072
part /tmp --fstype ext4 --size 3072
part /usr --fstype ext4 --size 5120
part swap --size 1024
#System authorization infomation
auth --useshadow --enablemd5 --enablenis --nisdomain dka.local --nisserver 1$
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure the X Window System
skipx
#################
#Package installation
#################
#Package install information
%packages
openssh-server
nmap
ssh
screen
bmon
iperf
bonnie++
lmbench
lm-sensors
snmpd
snmp
build-essential
gcc
openssh-client
nfs-common
mpich2
dsh
portmap
nis
%pre
#################
#Scipt run
#################
#!/bin/bash
echo "Pre-installation"
%post --nochroot
echo "portmap : 10.0.0.1" >> /target/etc/hosts.allow
echo "ypserver 10.0.0.1" >> /target/etc/yp.conf
perl -pi -w -e 's/\/home/\/home.old/g;' /target/etc/fstab
mkdir /target/mnt/tmp
echo "10.0.0.1:/home /home nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
echo "10.0.0.1:/script /mnt/tmp/ nfs rw,bg,hard,intr 0 0" >> /target/etc/fstab
/target/etc/init.d/nis restart
mount 10.0.0.1:/home/ /home/