Difference between revisions of "Raspberry - Getting Started"
From Teknologisk videncenter
m (→Installer div nice-to-have programmer) |
m (→Updater firmware) |
||
| Line 7: | Line 7: | ||
==Updater firmware== | ==Updater firmware== | ||
<source lang=bash> | <source lang=bash> | ||
| − | apt-get update | + | apt-get update && apt-get upgrade |
apt-get install git-core | apt-get install git-core | ||
wget http://goo.gl/1BOfJ -O /usr/bin/rpi-update && sudo chmod +x /usr/bin/rpi-update | wget http://goo.gl/1BOfJ -O /usr/bin/rpi-update && sudo chmod +x /usr/bin/rpi-update | ||
| Line 13: | Line 13: | ||
reboot | reboot | ||
</source> | </source> | ||
| + | |||
==Enable IPv6== | ==Enable IPv6== | ||
<source lang=bash> | <source lang=bash> | ||
Revision as of 11:58, 9 April 2015
Her vil der komme nogle små fifs til hvordan man starter med at lege med Raspberry Pi'en
Contents
Installation
Find en af de officielle distributioner og smide den på et SD kort.
Eller installer:
Updater firmware
apt-get update && apt-get upgrade
apt-get install git-core
wget http://goo.gl/1BOfJ -O /usr/bin/rpi-update && sudo chmod +x /usr/bin/rpi-update
rpi-update
reboot
Enable IPv6
# enable it on the fly
modprobe ipv6
#Enable it on the next reboot
echo ipv6 >> /etc/modules
Lav et script der viser temperatur og clock
nano /usr/bin/stats
#!/bin/bash
/opt/vc/bin/vcgencmd measure_temp
/opt/vc/bin/vcgencmd measure_clock arm
chmod +x /usr/bin/stats
Installer div nice-to-have programmer
apt-get install iperf nmon bmon htop screen smbclient parallel
Installer XBMC
Følg denne Guide