Latest revision as of 07:32, 13 May 2009

CoPP

This page is part of the Netband Project

Control Plane Policing

The Control Plane Policing feature allows users to configure a quality of service (QoS) filter that manages the traffic flow of control plane packets to protect the control plane of Cisco IOS routers and switches against reconnaissance and denial-of-service (DoS) attacks.
CoPP can help maintain packet forwarding and protocol states despite an attack or heavy traffic load on the router or switch.
Uses MQC (Modular QoS CLI)
In version 12.4(4)T additional features were introduced
- Control plane protection
- Port-filtering
- Queue-thresholding

Control Plane Protection

Introduces subinterfaces to the control plane
Aggregrate Control Plane Policing
- Control Plane cef-exception subinterface
  - receives all traffic that is either redirected as a result of a configured input feature in the CEF packet forwarding path for process switching or directly enqueued in the control plane input queue by the interface driver.
  - Eg. ARP, L2 Keepalives and all non-IP host traffic.
- Control Plane host subinterface
  - receives all control-plane IP traffic that is directly destined for one of the router interfaces.
  - All host traffic terminates on and is processed by the router.
  - Eg. SSH, SNMP, BGP, OSPF, Tunnel termination and EIGRP.
- Control Plane transit subinterface
  - receives all control-plane IP traffic that is software switched by the route processor.

Port-filter policy

Blocks traffic destined to closed or nonlistened TCP/UDP ports
Only works with the host subinterface.
Maintains a global database of all open TCP and UDP ports on the router, including ports created by applications.

Queue Threshold Policy

limits the number of unprocessed packets for a given higher level protocol allowed in the control-plane IP input queue.

Configuration

Control plane Policing

Versions prior to 12.4(4)T or if you only want to configure the aggregate interface

ip access-list extended coppacl-igp
 permit ospf any host 224.0.0.5
 permit ospf any host 224.0.0.6
 permit ospf any any
!
ip access-list extended coppacl-management
 permit tcp 10.0.0.0 0.255.255.255 any eq 22
 permit tcp 10.0.0.0 0.255.255.255 any eq telnet
 permit udp host 10.1.1.10 any eq snmp
 permit udp host 10.0.0.11 any eq ntp
!
ip access-list extended coppacl-monitoring
 permit icmp any any ttl-exceeded
 permit icmp any any port-unreachable
 permit icmp any any echo-reply
 permit icmp any any echo
!
ip access-list extended coppacl-critical-app
 permit udp host 0.0.0.0 host 255.255.255.255 eq bootps
 permit udp host 10.1.1.11 eq bootps any eq bootps
!
class-map match-all coppclass-igp
 match access-group name coppacl-igp
class-map match-all coppclass-management
 match access-group name coppacl-management
class-map match-all coppclass-monitoring
 match access-group name coppacl-monitoring
class-map match-all coppclass-critical-app
 match access-group name coppacl-critical-app
class-map match-all coppclass-layer2
 match protocol arp
!
policy-map copp-policy
 class coppclass-igp
 class coppclass-management
  police rate 250 pps conform-action transmit exceed-action drop
 class coppclass-monitoring
  police rate 50 pps conform-action transmit exceed-action drop
 class coppclass-critical-app
  police rate 75 pps conform-action transmit exceed-action drop
 class coppclass-layer2
  police rate 25 pps conform-action transmit exceed-action drop
 class class-default
  police rate 10 pps conform-action transmit exceed-action drop
!
control-plane
 service-policy input copp-policy

Port-filter policy

class-map type port-filter match-any portfilter-cmap
 match  closed-ports
!
policy-map type port-filter portfilter-pmap
 class portfilter-cmap
   drop
!
control-plane host
 service-policy type port-filter input portfilter-pmap
!

Queue-threshold policy

class-map type queue-threshold match-all queue-cmap
 match host-protocols
!
policy-map type queue-threshold queue-pmap
class queue-cmap
 queue-limit 100
!
control-plane host
 service-policy type queue-threshold input queue-pmap

Show output

B1rt1#sh control-plane host open-ports
Active internet connections (servers and established)
Prot        Local Address      Foreign Address                  Service    State
 tcp                 *:22                  *:0               SSH-Server   LISTEN
 tcp                 *:23                  *:0                   Telnet   LISTEN
 tcp                 *:80                  *:0                HTTP CORE   LISTEN
 tcp                 *:22       10.1.2.50:5954               SSH-Server ESTABLIS
 udp                 *:67                  *:0            DHCPD Receive   LISTEN
 udp                 *:68                  *:0             BootP client   LISTEN
 udp                *:123                  *:0                      NTP   LISTEN

B1rt1#sh control-plane host counters
Control plane host path counters :

Feature                  Packets Processed/Dropped/Errors

--------------------------------------------------------
TCP/UDP Portfilter           3337/2028/0
Protocol Queue Threshold      384/0/0

--------------------------------------------------------

B1rt1#sh control-plane counters
Feature Path             Packets processed/dropped/errors
Aggregate                  392996/2628/0
Host                         9373/2135/0
Transit                    369604/0/0
Cef-exception               11391/0/0

External Links

CoPP
CoP extended feature set
CoPP best practice design guide

@@ Line 1: / Line 1: @@
-<accesscontrol>NetBand</accesscontrol>
+=CoPP=
 This page is part of the [[Netband_Project|Netband Project]]
 ==Control Plane Policing==
@@ Line 5: / Line 5: @@
 *CoPP can help maintain packet forwarding and protocol states despite an attack or heavy traffic load on the router or switch.
 *Uses MQC (Modular QoS CLI)
-*Prior to 12.4(4)T it was only possible to configure the aggregate interface
+*In version 12.4(4)T additional features were introduced
+**Control plane protection
+**Port-filtering
+**Queue-thresholding
 ==Control Plane Protection==
-*Introduces subinterfaces to the control plane(12.4T)
+*Introduces subinterfaces to the control plane
 *Aggregrate Control Plane Policing
 **Control Plane cef-exception subinterface
@@ Line 21: / Line 24: @@
 [[Image:CoPP.JPG|Architechture]]
+==Port-filter policy==
+*Blocks traffic destined to closed or nonlistened TCP/UDP ports
+*Only works with the host subinterface.
+*Maintains a global database of all open TCP and UDP ports on the router, including ports created by applications.
+==Queue Threshold Policy==
+*limits the number of unprocessed packets for a given higher level protocol allowed in the control-plane IP input queue.
 ==Configuration==
-<pre>Versions prior to 12.4(4)T
+Control plane Policing
+<pre>Versions prior to 12.4(4)T or if you only want to configure the aggregate interface
 ip access-list extended coppacl-igp
@@ Line 72: / Line 84: @@
 control-plane
   service-policy input copp-policy
+</pre>
+Port-filter policy
+<pre>class-map type port-filter match-any portfilter-cmap
+ match  closed-ports
+!
+policy-map type port-filter portfilter-pmap
+ class portfilter-cmap
+   drop
+!
+control-plane host
+ service-policy type port-filter input portfilter-pmap
+!
+</pre>
+Queue-threshold policy
+<pre>class-map type queue-threshold match-all queue-cmap
+ match host-protocols
+!
+policy-map type queue-threshold queue-pmap
+class queue-cmap
+ queue-limit 100
+!
+control-plane host
+ service-policy type queue-threshold input queue-pmap
+</pre>
+==Show output==
+<pre>B1rt1#sh control-plane host open-ports
+Active internet connections (servers and established)
+Prot        Local Address      Foreign Address                  Service    State
+ tcp                 *:22                  *:0               SSH-Server   LISTEN
+ tcp                 *:23                  *:0                   Telnet   LISTEN
+ tcp                 *:80                  *:0                HTTP CORE   LISTEN
+ tcp                 *:22       10.1.2.50:5954               SSH-Server ESTABLIS
+ udp                 *:67                  *:0            DHCPD Receive   LISTEN
+ udp                 *:68                  *:0             BootP client   LISTEN
+ udp                *:123                  *:0                      NTP   LISTEN
+</pre>
+<pre>
+B1rt1#sh control-plane host counters
+Control plane host path counters :
+Feature                  Packets Processed/Dropped/Errors
+--------------------------------------------------------
+TCP/UDP Portfilter           3337/2028/0
+Protocol Queue Threshold      384/0/0
+--------------------------------------------------------
+</pre>
+<pre>
+B1rt1#sh control-plane counters
+Feature Path             Packets processed/dropped/errors
+Aggregate                  392996/2628/0
+Host                         9373/2135/0
+Transit                    369604/0/0
+Cef-exception               11391/0/0
 </pre>
 ==External Links==
-Prior to 12.4(4)T
-<br>
 [http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6642/prod_white_paper0900aecd804fa16a.html CoPP]
 <br>
-.4(4)T and forward
+[http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/ctrl_plane_prot_ps6441_TSD_Products_Configuration_Guide_Chapter.html CoP extended feature set]
-<br>
-[http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/ctrl_plane_prot_ps6441_TSD_Products_Configuration_Guide_Chapter.html CoP]
 <br>
 [http://www.cisco.com/web/about/security/intelligence/coppwp_gs.html CoPP best practice design guide]
+[[Category:network]][[Category:CCNP]][[category:students]]

Navigation menu

Difference between revisions of "Netband Project - CoPP"

Latest revision as of 07:32, 13 May 2009

Contents

CoPP

Control Plane Policing

Control Plane Protection

Port-filter policy

Queue Threshold Policy

Configuration

Show output

External Links