Difference between revisions of "BO CCNA Course/coursematerials/Basic Switching Setup"
From Teknologisk videncenter
m |
m |
||
(One intermediate revision by the same user not shown) | |||
Line 11: | Line 11: | ||
#Set the correct clock on the devices | #Set the correct clock on the devices | ||
#Create VLAN 99 and name it '''MGMT''' | #Create VLAN 99 and name it '''MGMT''' | ||
− | |||
#Configure all the switch ports to be access ports in VLAN 99 | #Configure all the switch ports to be access ports in VLAN 99 | ||
#Configure port-security on the switch to only allow 1 MAC address, and make it sticky. Violation mode should be shutdown. | #Configure port-security on the switch to only allow 1 MAC address, and make it sticky. Violation mode should be shutdown. | ||
+ | ##Try to reconnect the computers and verify that port-security is enabled |
Latest revision as of 10:39, 19 June 2012
Configure the following setup in Packet Tracer
- Connect the devices as shown on the diagram
- Configure IP address on all the devices, and test connectivity
- Configure the router to be the default gateway of the switch
- Configure a password on the switch & router
- Configure telnet access to the switch and router
- configure Login and MOTD banner on the devices
- Set the correct clock on the devices
- Create VLAN 99 and name it MGMT
- Configure all the switch ports to be access ports in VLAN 99
- Configure port-security on the switch to only allow 1 MAC address, and make it sticky. Violation mode should be shutdown.
- Try to reconnect the computers and verify that port-security is enabled