Difference between revisions of "Wireless LAN Controller 4400/init conf"

(Cisco Controller)


Welcome to the Cisco Wizard Configuration Tool
Use the '-' character to backup


Would you like to terminate autoinstall? [yes]:

System Name [Cisco_e9:4a:e3] (31 characters max):
AUTO-INSTALL: process terminated -- no configuration loaded
<input>Cisco_4404</input>
Enter Administrative User Name (24 characters max): <input>admin</input>
Enter Administrative Password (3 to 24 characters): <input>*******</input>
Re-enter Administrative Password                 : <input>*******</input>

Service Interface IP Address Configuration [static][DHCP]:

Enable Link Aggregation (LAG) [yes][NO]:

Management Interface IP Address: <input>192.168.139.20</input>
Management Interface Netmask: <input>255.255.255.0</input>
Management Interface Default Router: <input>192.168.139.1</input>
Management Interface VLAN Identifier (0 = untagged):
Management Interface Port Num [1 to 4]: <input>1</input>
Management Interface DHCP Server IP Address: <input>172.16.4.77</input>
AP Manager Interface IP Address: <input>192.168.139.21</input>

AP-Manager is on Management subnet, using same values
AP Manager Interface DHCP Server (172.16.4.77):

Virtual Gateway IP Address: <input>1.1.1.1</input>

Mobility/RF Group Name: <input>MobGroup</input>

Network Name (SSID): <input>RE_Wireless</input>

Configure DHCP Bridging Mode [yes][NO]:

Allow Static IP Addresses [YES][no]:

Configure a RADIUS Server now? [YES][no]: <input>no</input>
Warning! The default WLAN security policy requires a RADIUS server.
Please see documentation for more details.

Enter Country Code list (enter 'help' for a list of countries) [US]: <input>DK</input>

Enable 802.11b Network [YES][no]: <input>no</input>
Enable 802.11a Network [YES][no]:
Enable Auto-RF [YES][no]:

Configure a NTP server now? [YES][no]:
Enter the NTP server's IP address: <input>172.16.4.17</input>
Enter a polling interval between 3600 and 604800 secs: <input>3600</input>

Configuration correct? If yes, system will save it and reset. [yes][NO]: <input>yes</input>Restoring web auth certRestoring web auth cert

Configuration saved!
Resetting system with new configuration...


Configuration saved!
Resetting system with new configuration...


Bootloader 7.0.116.0 (Apr 13 2011 - 14:30:45)

Motorola PowerPC ProcessorID=00000000 Rev. PVR=80200020
        CPU: 833 MHz
        CCB: 333 MHz
        DDR: 166 MHz
        LBC: 41 MHz
L1 D-cache 32KB, L1 I-cache 32KB enabled.
I2C:   ready
DTT:   1 is 35 C
DRAM:  DDR module detected, total size:512MB.
512 MB
8540 in PCI Host Mode.
8540 is the PCI Arbiter.

Memory Test PASS

FLASH:
  Flash Bank 0: portsize = 2, size = 8 MB in 142 Sectors
 8 MB
L2 cache enabled: 256KB
Card Id: 1536
Card Revision Id: 1
Card CPU Id: 1287
Number of MAC Addresses: 32
Number of Slots Supported: 4
Serial Number: FOC1145F076
Unknown command Id: 0xa5
Unknown command Id: 0xa4
Unknown command Id: 0xa3
Manufacturers ID: 30464
Board Maintenance Level: 00
Number of supported APs: 100
In:    serial
Out:   serial
Err:   serial





                      .o88b. d888888b .d8888.  .o88b.  .d88b.
                     d8P  Y8   `88'   88'  YP d8P  Y8 .8P  Y8.
                     8P         88    `8bo.   8P      88    88
                     8b         88      `Y8b. 8b      88    88
                     Y8b  d8   .88.   db   8D Y8b  d8 `8b  d8'
                      `Y88P' Y888888P `8888Y'  `Y88P'  `Y88P'
                    Model AIR-WLC4404-100-K9   S/N: FOC1145F076
Net:
 PHY DEVICE  : Found Intel LXT971A PHY at 0x01
FEC ETHERNET
IDE:   Bus 0: OK
  Device 0: Model: SMART CF Firm: 20060811 Ser#: 00001011710100540124
            Type: Hard Disk
            Capacity: 247.0 MB = 0.2 GB (506016 x 512)
  Device 1: not available

Booting Primary Image...
Press <ESC> now for additional boot options...
Detecting Hardware . . .



Cryptographic library self-test....passed!
XML config selected
Validating XML configuration
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.

Cisco AireOS Version 7.0.116.0
Initializing OS Services: ok
Initializing Serial Services: ok
Initializing Internal Interfaces: ok
Initializing Network Services: ok
Starting ARP Services: ok
Starting Trap Manager: ok
Starting Network Interface Management Services: ok
Starting System Services: ok
Starting FIPS Features: ok : Not enabled
Starting Fastpath Hardware Acceleration: ok
Starting Switching Services: ok
Starting QoS Services: ok
Starting Policy Manager: ok
Starting Data Transport Link Layer: ok
Starting Access Control List Services: ok
Starting System Interfaces: ok
Starting Client Troubleshooting Service: ok
Starting Management Frame Protection: ok
Starting Certificate Database: ok
Starting VPN Services: ok
Starting LWAPP: ok
Starting CAPWAP: ok
Starting LOCP: ok
Starting Security Services: ok
Starting Policy Manager: ok
Starting Authentication Engine: ok
Starting Mobility Management: ok
Starting Virtual AP Services: ok
Starting AireWave Director: ok
Starting Network Time Services: ok
Starting Cisco Discovery Protocol: ok
Starting Broadcast Services: ok
Starting Logging Services: ok
Starting DHCP Server: ok
Starting IDS Signature Manager: ok
Starting RFID Tag Tracking: ok
Starting Power Supply and Fan Status Monitoring Service: ok
Starting Mesh Services:  ok
Starting TSM: ok
Starting CIDS Services: ok
Starting Ethernet-over-IP: ok
Starting DTLS server:  enabled in CAPWAP
Starting CleanAir: ok
Starting WIPS: ok
Starting SSHPM LSC PROV LIST: ok
Starting RRC Services: ok
Starting FMC HS: ok
Starting Management Services:
   Web Server: ok
   CLI: ok
   Secure Web: ok

(Cisco Controller)

Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)

User:  <input>admin</input>
Password:<input>*******</input>
(Cisco Controller) ><input>show interface</input>

Incorrect usage.  Use the '?' or <TAB> key to list commands.

(Cisco Controller) ><input>show interface</input>

summary        Display a summary of the local interfaces.
detailed       Display detailed interface information.

group          Display a summary of the local interface groups.

(Cisco Controller) >show interface

summary        Display a summary of the local interfaces.
detailed       Display detailed interface information.

group          Display a summary of the local interface groups.

(Cisco Controller) ><input>show interface summary</input>

Interface Name                   Port Vlan Id  IP Address      Type    Ap Mgr Guest
-------------------------------- ---- -------- --------------- ------- ------ -----
ap-manager                       1    untagged 192.168.139.21  Static  Yes    No
management                       1    untagged 192.168.139.20  Static  No     No
service-port                     N/A  N/A      0.0.0.0         DHCP    No     No
virtual                          N/A  N/A      1.1.1.1         Static  No     No

(Cisco Controller) ><input>show interface summary</input>

Interface Name                   Port Vlan Id  IP Address      Type    Ap Mgr Guest
-------------------------------- ---- -------- --------------- ------- ------ -----
ap-manager                       1    untagged 192.168.139.21  Static  Yes    No
management                       1    untagged 192.168.139.20  Static  No     No
service-port                     N/A  N/A      0.0.0.0         DHCP    No     No
virtual                          N/A  N/A      1.1.1.1         Static  No     No

(Cisco Controller) >