Difference between revisions of "Netband Project - Device hardening"

From Teknologisk videncenter
Jump to: navigation, search
(→‎Login Password Retry Lockout)
m
 
(34 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
<accesscontrol>NetBand</accesscontrol>
+
=Device hardening=
 
This page is part of the [[Netband_Project|Netband Project]]<br/>  
 
This page is part of the [[Netband_Project|Netband Project]]<br/>  
  
 
==Exclusive Configuration Change Access==
 
==Exclusive Configuration Change Access==
 
*ensures that only one administrator makes configuration changes to a Cisco IOS device at a given time.
 
*ensures that only one administrator makes configuration changes to a Cisco IOS device at a given time.
−
<pre>B1rt1(config)#configuration mode exclusive auto
+
<source lang=cli>
 +
B1rt1(config)#<input>configuration mode exclusive auto</input>
 
!
 
!
−
B1rt1(config)#interface fa0/0
+
B1rt1#<input>conf t</input>
 +
Enter configuration commands, one per line.  End with CNTL/Z.
 +
B1rt1(config)#
 +
Apr 16 13:02:58.746:  Configuration mode locked exclusively. The lock will be cleared once you exit out of configuration mode using end/exit
 +
</source>
 +
 
 +
<source lang=cli>B1rt1(config)#<input>interface fa0/0</input>
 
Configuration mode locked exclusively by user 'admin' process '56' from terminal '195'. Please try later.
 
Configuration mode locked exclusively by user 'admin' process '56' from terminal '195'. Please try later.
−
</pre>
+
</source>
 
For more information see: [http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gt_exclu.html Exclusive Configuration Change Access]
 
For more information see: [http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gt_exclu.html Exclusive Configuration Change Access]
  
Line 17: Line 24:
 
secure boot-config
 
secure boot-config
 
</pre>
 
</pre>
−
<pre>B1rt1#sh secure bootset
+
<source lang=cli>B1rt1#<input>sh secure bootset</input>
 
IOS resilience router id FCZ111910E5
 
IOS resilience router id FCZ111910E5
  
Line 28: Line 35:
 
Secure archive flash:.runcfg-20090416-110611.ar type is config
 
Secure archive flash:.runcfg-20090416-110611.ar type is config
 
configuration archive size 4555 bytes
 
configuration archive size 4555 bytes
−
</pre>
+
</source>
−
<pre>B1rt1(config)#no secure boot-config
+
<source lang=cli>B1rt1(config)#<input>no secure boot-config</input>
 
%You must be logged on the console to apply this command
 
%You must be logged on the console to apply this command
−
</pre>
+
</source>
−
<pre>B1rt1(config)#secure boot-config restore flash:rescueconf
+
<source lang=cli>B1rt1(config)#<input>secure boot-config restore flash:rescueconf</input>
 
ios resilience:configuration successfully restored as flash:rescueconf
 
ios resilience:configuration successfully restored as flash:rescueconf
−
</pre>
+
</source>
 
For more information see: [http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/gtrescfg.html Cisco IOS Resilient Configuration]
 
For more information see: [http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/gtrescfg.html Cisco IOS Resilient Configuration]
  
 
==Reserve Memory for Console Access==
 
==Reserve Memory for Console Access==
 
*used in order to reserve enough memory to ensure console access to a Cisco IOS device
 
*used in order to reserve enough memory to ensure console access to a Cisco IOS device
−
<pre>memory reserve console 4096
+
<source lang=cli>memory reserve console 4096
−
</pre>
+
</source>
 
For more information see: [http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/ftresmem.html Reserve Memory for Console Access]
 
For more information see: [http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/ftresmem.html Reserve Memory for Console Access]
  
 
==Memory Leak Detector==
 
==Memory Leak Detector==
 
*used in order to check the memory structures of a device and acquire the latest crash information to determine what processes corrupt the chunks.
 
*used in order to check the memory structures of a device and acquire the latest crash information to determine what processes corrupt the chunks.
−
<pre>
+
<source lang=cli>
 
scheduler heapcheck process memory
 
scheduler heapcheck process memory
−
</pre>
+
</source>
 +
For more information see: [http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtmleakd.html Memory Leak Detector]
 +
 
 
==Buffer Overflow: Detection and Correction of Redzone Corruption==
 
==Buffer Overflow: Detection and Correction of Redzone Corruption==
 
*A memory block overflow problem is detected in the Cisco IOS software when the value of an area in the memory block called the "redzone" is checked
 
*A memory block overflow problem is detected in the Cisco IOS software when the value of an area in the memory block called the "redzone" is checked
 
*When a memory block overflow problem is detected in packet memory, software will change the memory block header data back to its correct value.
 
*When a memory block overflow problem is detected in packet memory, software will change the memory block header data back to its correct value.
−
<pre>exception memory ignore overflow io
+
<source lang=cli>exception memory ignore overflow io
 
exception memory ignore overflow processor
 
exception memory ignore overflow processor
−
</pre>
+
</source>
−
<pre>
+
<source lang=cli>
 
show memory overflow
 
show memory overflow
−
</pre>
+
</source>
 +
For more information see: [http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtbufflo.html Buffer Overflow: Detection and Correction of Redzone Corruption]
 +
 
 
==EXEC Timeout==
 
==EXEC Timeout==
 
*logs out sessions on vty or tty lines that are left idle.
 
*logs out sessions on vty or tty lines that are left idle.
 
*Default is 10 minutes
 
*Default is 10 minutes
−
<pre>
+
<source lang=cli>
 
line con 0
 
line con 0
 
  exec-timeout 5
 
  exec-timeout 5
 
line vty 0 4
 
line vty 0 4
 
  exec-timeout 5
 
  exec-timeout 5
−
</pre>
+
</source>
 +
*on some older IOS versions the default is, no timeout
 +
*when all lines are occupied, no one can log in until the device is restarted or the sessions are cleared through the console
 +
<source lang=cli>B1rt1#<input>sh users</input>
 +
    Line      User      Host(s)              Idle      Location
 +
* vty 194      admin      idle                00:00:00 10.1.2.50
 +
  vty 195      admin2    idle                00:00:03 10.1.2.50
 +
 
 +
B1rt1#<input>clear line 195</input>
 +
[confirm]
 +
[OK]
 +
B1rt1#
 +
</source>
 +
 
 
==Disable Unused Services==
 
==Disable Unused Services==
  
−
<pre>no ip finger
+
<source lang=cli>no ip finger
 
ip dhcp bootp ignore
 
ip dhcp bootp ignore
 
no service pad
 
no service pad
Line 77: Line 101:
 
no service udp-small-servers
 
no service udp-small-servers
 
no service tcp-small-servers
 
no service tcp-small-servers
−
</pre>
+
</source>
 
==No Service Password-Recovery==
 
==No Service Password-Recovery==
 
*Disables password recovery through ROMMON
 
*Disables password recovery through ROMMON
 
*The router can be reset to factory default configuration, but the stored configuration is lost
 
*The router can be reset to factory default configuration, but the stored configuration is lost
−
<pre>no service password-recovery
+
<source lang=cli>no service password-recovery
−
</pre>
+
</source>
 
For more information see: [http://www.cisco.com/en/US/docs/ios/12_3/12_3y/12_3ya8/gtnsvpwd.html#wp1056707 No Service Password-Recovery]
 
For more information see: [http://www.cisco.com/en/US/docs/ios/12_3/12_3y/12_3ya8/gtnsvpwd.html#wp1056707 No Service Password-Recovery]
 
==Password Management==
 
==Password Management==
 
*Uses Message Digest 5 (MD5) for password hashing
 
*Uses Message Digest 5 (MD5) for password hashing
−
<pre>enable secret cisco
+
<source lang=cli>enable secret cisco
−
</pre>
+
</source>
 
*prevents casual observers from reading passwords
 
*prevents casual observers from reading passwords
 
*weak password encryption
 
*weak password encryption
−
<pre>
+
<source lang=cli>
 
service password-encryption
 
service password-encryption
−
</pre>
+
</source>
 +
 
 
==Login Password Retry Lockout==
 
==Login Password Retry Lockout==
 
*locks an user account after a configured number of failed attempts
 
*locks an user account after a configured number of failed attempts
−
*A user with privelegde level 15 cannot be locked out
+
*must be manually unlocked again
−
<pre>
+
*A user with privilege level 15 cannot be locked out
 +
<source lang=cli>
 
aaa new-model
 
aaa new-model
 
aaa local authentication attempts max-fail 3
 
aaa local authentication attempts max-fail 3
 
aaa authentication login default local
 
aaa authentication login default local
 
!
 
!
−
username admin2 priveledge 14 secret cisco
+
username admin2 privilege 14 secret cisco
−
</pre>
+
</source>
−
<pre>Apr 16 12:36:41.257: %AAA-5-USER_LOCKED: User admin2 locked out on authentication failure
+
<source lang=cli>Apr 16 12:36:41.257: %AAA-5-USER_LOCKED: User admin2 locked out on authentication failure
 +
 
 +
B1rt1#<input>clear aaa local user lockout username admin2</input>
  
−
B1rt1#clear aaa local user lockout username admin2
 
−
B1rt1#
 
 
Apr 16 12:39:57.474: %AAA-5-USER_UNLOCKED: User admin2 unlocked by admin on vty0 (192.168.0.11)
 
Apr 16 12:39:57.474: %AAA-5-USER_UNLOCKED: User admin2 unlocked by admin on vty0 (192.168.0.11)
−
</pre>
+
</source>
 
For more information see: [http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/g_cilprl.html Login Password Retry Lockout]
 
For more information see: [http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/g_cilprl.html Login Password Retry Lockout]
 +
 +
==Cisco IOS Login Enhancements==
 +
*adds a delay between successive logins
 +
*login shutdown(quiet mode) for a specified period of time
 +
*Allows for speficied hosts or subnets to login in during quiet mode
 +
<source lang=cli>login block-for 120 attempts 2 within 30
 +
login delay 2
 +
login on-failure log
 +
login quiet-mode access-class 2
 +
access-list 2 permit 10.0.0.0 0.255.255.255
 +
</source>
 +
 +
<source lang=cli>Apr 16 15:30:29.249: %SEC_LOGIN-1-QUIET_MODE_ON: Still timeleft for watching failures is 0 secs, [user: ] [Source: 192.168.3.12] [localport: 22] [Reason: Login Authentication Failed] [ACL: sl_def_acl] at 15:30:29 UTC Thu Apr 16 2009
 +
 +
Note: The sl_def_acl is created by the system and cannot be removed or modified
 +
Extended IP access list sl_def_acl
 +
    10 deny tcp any any eq telnet log
 +
    20 deny tcp any any eq www log
 +
    30 deny tcp any any eq 22 log
 +
    40 permit tcp any any eq 22 log
 +
 +
Apr 16 15:32:29.252: %SEC_LOGIN-5-QUIET_MODE_OFF: Quiet Mode is OFF, because block period timed out at 15:32:29 UTC Thu Apr 16 2009
 +
</source>
 +
<source lang=cli>B1rt1#<input>sh login failures</input>
 +
Total failed logins: 7
 +
Detailed information about last 50 failures
 +
 +
Username        SourceIPAddr    lPort Count TimeStamp
 +
                10.248.10.98    22    2    07:30:17 UTC Sun Dec 14 2008
 +
                10.1.0.53      22    1    21:27:15 UTC Mon Dec 22 2008
 +
                192.168.3.10    22    2    15:02:23 UTC Thu Jan 8 2009
 +
                192.168.3.12    22    2    15:30:17 UTC Thu Apr 16 2009
 +
</source>
 +
<source lang=cli>B1rt1#<input>sh login</input>
 +
    A login delay of 2 seconds is applied.
 +
    Quiet-Mode access list 2 is applied.
 +
 +
    Router enabled to watch for login Attacks.
 +
    If more than 2 login failures occur in 30 seconds or less,
 +
    logins will be disabled for 120 seconds.
 +
 +
    Router presently in Normal-Mode.
 +
    Current Watch Window
 +
        Time remaining: 8 seconds.
 +
        Login failures for current window: 0.
 +
    Total login failures: 7.
 +
</source>
 +
 +
==Encrypting Management Sessions==
 +
*use SSH instead of telnet
 +
*use HTTPS instead of HTTP
 +
<source lang=cli>
 +
ip domain-name netband.dk
 +
!
 +
B1rt1(config)#<input>crypto key generate rsa</input>
 +
Choose the size of the key modulus in the range of 360 to 2048 for your
 +
  General Purpose Keys. Choosing a key modulus greater than 512 may take
 +
  a few minutes.
 +
 +
How many bits in the modulus [512]:2048
 +
% Generating 2048 bit RSA keys, keys will be non-exportable...[OK]
 +
 +
B1rt1(config)#
 +
Apr 16 12:50:47.916: %SSH-5-ENABLED: SSH 2.0 has been enabled
 +
 +
B1rt1(config)#<input>ip ssh time-out 60</input>
 +
B1rt1(config)#<input>ip ssh authentication-retries 3</input>
 +
 +
B1rt1#<input>sh ip ssh</input>
 +
SSH Enabled - version 2.0
 +
Authentication timeout: 60 secs; Authentication retries: 3
 +
</source>
 +
 +
<source lang=cli>B1rt1(config)#<input>no ip http server</input>
 +
B1rt1(config)#<input>ip http secure-server</input>
 +
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]
 +
</source>
 +
 +
== Control vty and tty Lines ==
 +
 +
*Disable unwanted access methods to and from the virtual lines
 +
*Use access-lists to control access to the virtual lines
 +
<source lang=cli>line vty 0 4
 +
transport input ssh
 +
transport output ssh
 +
access-class 2 in
 +
line vty 5
 +
transport input ssh
 +
transport output ssh
 +
access-class 2 in
 +
!
 +
access-list 2 permit 10.0.0.0 0.255.255.255
 +
</source>
 +
 +
==Mangement Plane Protection==
 +
*restricts management to one or more logical or physical interfaces
 +
*Can be used as an alternative to vty access-list and interface access-lists
 +
*Works with ftp, http, https, ssh, telnet, tftp and snmp
 +
<source lang=cli>control-plane host
 +
management-interface FastEthernet0/0 allow ssh
 +
 +
Apr 16 20:04:32.067: %CP-5-FEATURE: Management-Interface feature enabled on Control plane host path
 +
</source>
 +
<source lang=cli>B1rt1#<input>show management-interface</input>
 +
Management interface FastEthernet0/0
 +
        Protocol        Packets processed
 +
            ssh                223981
 +
</source>
 +
For more information see: [http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htsecmpp.html#wp1049489 Management Plane Protection]
  
 
==External links==
 
==External links==
 
[http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080120f48.shtml Cisco Guide to Harden Cisco IOS Devices]
 
[http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080120f48.shtml Cisco Guide to Harden Cisco IOS Devices]
 +
{{Source cli}}
 +
[[Category:network]][[Category:CCNP]][[category:students]][[Category:CCNP4]]

Latest revision as of 19:54, 30 June 2010

Device hardening

This page is part of the Netband Project

Exclusive Configuration Change Access

  • ensures that only one administrator makes configuration changes to a Cisco IOS device at a given time.
B1rt1(config)#<input>configuration mode exclusive auto</input>
!
B1rt1#<input>conf t</input>
Enter configuration commands, one per line.  End with CNTL/Z.
B1rt1(config)#
Apr 16 13:02:58.746:  Configuration mode locked exclusively. The lock will be cleared once you exit out of configuration mode using end/exit
B1rt1(config)#<input>interface fa0/0</input>
Configuration mode locked exclusively by user 'admin' process '56' from terminal '195'. Please try later.

For more information see: Exclusive Configuration Change Access

Cisco IOS Software Resilient Configuration

  • stores a copy of the Cisco IOS software image and device configuration that is currently being used by a Cisco IOS device.
  • Can only be disabled through console access 
secure boot-image
secure boot-config

B1rt1#<input>sh secure bootset</input>
IOS resilience router id FCZ111910E5

IOS image resilience version 12.4 activated at 11:05:51 UTC Thu Apr 16 2009
Secure archive flash:c2801-advipservicesk9-mz.124-9.T.bin type is image (elf) []
  file size is 30588892 bytes, run size is 30754576 bytes
  Runnable image, entry point 0x8000F000, run from ram

IOS configuration resilience version 12.4 activated at 11:06:11 UTC Thu Apr 16 2009
Secure archive flash:.runcfg-20090416-110611.ar type is config
configuration archive size 4555 bytes
B1rt1(config)#<input>no secure boot-config</input>
%You must be logged on the console to apply this command
B1rt1(config)#<input>secure boot-config restore flash:rescueconf</input>
ios resilience:configuration successfully restored as flash:rescueconf

For more information see: Cisco IOS Resilient Configuration

Reserve Memory for Console Access

  • used in order to reserve enough memory to ensure console access to a Cisco IOS device
memory reserve console 4096

For more information see: Reserve Memory for Console Access

Memory Leak Detector

  • used in order to check the memory structures of a device and acquire the latest crash information to determine what processes corrupt the chunks.
scheduler heapcheck process memory

For more information see: Memory Leak Detector

Buffer Overflow: Detection and Correction of Redzone Corruption

  • A memory block overflow problem is detected in the Cisco IOS software when the value of an area in the memory block called the "redzone" is checked
  • When a memory block overflow problem is detected in packet memory, software will change the memory block header data back to its correct value.
exception memory ignore overflow io
exception memory ignore overflow processor
show memory overflow

For more information see: Buffer Overflow: Detection and Correction of Redzone Corruption

EXEC Timeout

  • logs out sessions on vty or tty lines that are left idle.
  • Default is 10 minutes
line con 0
 exec-timeout 5
line vty 0 4
 exec-timeout 5
  • on some older IOS versions the default is, no timeout
  • when all lines are occupied, no one can log in until the device is restarted or the sessions are cleared through the console
B1rt1#<input>sh users</input>
    Line       User       Host(s)              Idle       Location
* vty 194      admin      idle                 00:00:00 10.1.2.50
  vty 195      admin2     idle                 00:00:03 10.1.2.50

B1rt1#<input>clear line 195</input>
[confirm]
 [OK]
B1rt1#

Disable Unused Services

no ip finger
ip dhcp bootp ignore
no service pad
no ip http server 
no service config

On versions prior to 12.0, also do:
no service udp-small-servers
no service tcp-small-servers

No Service Password-Recovery

  • Disables password recovery through ROMMON
  • The router can be reset to factory default configuration, but the stored configuration is lost
no service password-recovery

For more information see: No Service Password-Recovery

Password Management

  • Uses Message Digest 5 (MD5) for password hashing
enable secret cisco
  • prevents casual observers from reading passwords
  • weak password encryption
service password-encryption

Login Password Retry Lockout

  • locks an user account after a configured number of failed attempts
  • must be manually unlocked again
  • A user with privilege level 15 cannot be locked out
aaa new-model
aaa local authentication attempts max-fail 3
aaa authentication login default local
!
username admin2 privilege 14 secret cisco
Apr 16 12:36:41.257: %AAA-5-USER_LOCKED: User admin2 locked out on authentication failure

B1rt1#<input>clear aaa local user lockout username admin2</input>

Apr 16 12:39:57.474: %AAA-5-USER_UNLOCKED: User admin2 unlocked by admin on vty0 (192.168.0.11)

For more information see: Login Password Retry Lockout

Cisco IOS Login Enhancements

  • adds a delay between successive logins
  • login shutdown(quiet mode) for a specified period of time
  • Allows for speficied hosts or subnets to login in during quiet mode
login block-for 120 attempts 2 within 30
login delay 2
login on-failure log
login quiet-mode access-class 2
access-list 2 permit 10.0.0.0 0.255.255.255
Apr 16 15:30:29.249: %SEC_LOGIN-1-QUIET_MODE_ON: Still timeleft for watching failures is 0 secs, [user: ] [Source: 192.168.3.12] [localport: 22] [Reason: Login Authentication Failed] [ACL: sl_def_acl] at 15:30:29 UTC Thu Apr 16 2009

Note: The sl_def_acl is created by the system and cannot be removed or modified
Extended IP access list sl_def_acl
    10 deny tcp any any eq telnet log
    20 deny tcp any any eq www log
    30 deny tcp any any eq 22 log
    40 permit tcp any any eq 22 log

Apr 16 15:32:29.252: %SEC_LOGIN-5-QUIET_MODE_OFF: Quiet Mode is OFF, because block period timed out at 15:32:29 UTC Thu Apr 16 2009
B1rt1#<input>sh login failures</input>
Total failed logins: 7
Detailed information about last 50 failures

Username        SourceIPAddr    lPort Count TimeStamp
                10.248.10.98    22    2     07:30:17 UTC Sun Dec 14 2008
                10.1.0.53       22    1     21:27:15 UTC Mon Dec 22 2008
                192.168.3.10    22    2     15:02:23 UTC Thu Jan 8 2009
                192.168.3.12    22    2     15:30:17 UTC Thu Apr 16 2009
B1rt1#<input>sh login</input>
     A login delay of 2 seconds is applied.
     Quiet-Mode access list 2 is applied.

     Router enabled to watch for login Attacks.
     If more than 2 login failures occur in 30 seconds or less,
     logins will be disabled for 120 seconds.

     Router presently in Normal-Mode.
     Current Watch Window
         Time remaining: 8 seconds.
         Login failures for current window: 0.
     Total login failures: 7.

Encrypting Management Sessions

  • use SSH instead of telnet
  • use HTTPS instead of HTTP
ip domain-name netband.dk
!
B1rt1(config)#<input>crypto key generate rsa</input>
Choose the size of the key modulus in the range of 360 to 2048 for your
  General Purpose Keys. Choosing a key modulus greater than 512 may take
  a few minutes.

How many bits in the modulus [512]:2048
% Generating 2048 bit RSA keys, keys will be non-exportable...[OK]

B1rt1(config)#
Apr 16 12:50:47.916: %SSH-5-ENABLED: SSH 2.0 has been enabled

B1rt1(config)#<input>ip ssh time-out 60</input>
B1rt1(config)#<input>ip ssh authentication-retries 3</input>

B1rt1#<input>sh ip ssh</input>
SSH Enabled - version 2.0
Authentication timeout: 60 secs; Authentication retries: 3
B1rt1(config)#<input>no ip http server</input>
B1rt1(config)#<input>ip http secure-server</input>
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]

Control vty and tty Lines

  • Disable unwanted access methods to and from the virtual lines
  • Use access-lists to control access to the virtual lines
line vty 0 4
 transport input ssh
 transport output ssh
 access-class 2 in
line vty 5
 transport input ssh
 transport output ssh
 access-class 2 in
!
access-list 2 permit 10.0.0.0 0.255.255.255

Mangement Plane Protection

  • restricts management to one or more logical or physical interfaces
  • Can be used as an alternative to vty access-list and interface access-lists
  • Works with ftp, http, https, ssh, telnet, tftp and snmp
control-plane host
management-interface FastEthernet0/0 allow ssh

Apr 16 20:04:32.067: %CP-5-FEATURE: Management-Interface feature enabled on Control plane host path
B1rt1#<input>show management-interface</input>
Management interface FastEthernet0/0
        Protocol        Packets processed
             ssh                223981

For more information see: Management Plane Protection

External links

Cisco Guide to Harden Cisco IOS Devices

Retrieved from "http://mars.merhot.dk/w/index.php?title=Netband_Project_-_Device_hardening&oldid=12473"