Difference between revisions of "Netband Project - Multicast"

From Teknologisk videncenter
Jump to: navigation, search
(New page: This page is part of the Netband Project)
 
m (→‎Verification)
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
=Multicast=
 
This page is part of the [[Netband_Project|Netband Project]]
 
This page is part of the [[Netband_Project|Netband Project]]
 +
*A multicast server is installed on the server HQDC1
 +
 +
==Configuration==
 +
*Switch
 +
*Only configuration from HQSW1 is shown, as the configuration on B1SW1 is identical
 +
<pre>ip multicast-routing distributed
 +
!
 +
interface FastEthernet0/24
 +
description HQrt1
 +
no switchport
 +
ip address 10.255.255.1 255.255.255.252
 +
ip pim sparse-dense-mode
 +
ip ospf network point-to-point
 +
ip ospf dead-interval minimal hello-multiplier 4
 +
!
 +
interface Vlan3
 +
ip address 10.1.1.1 255.255.255.0
 +
ip pim sparse-dense-mode
 +
!
 +
ip pim rp-address 10.0.0.12
 +
</pre>
 +
*Routers
 +
*Only configuration from HQSRT1 is shown, as the configuration on B1RR1 is identical
 +
<pre>ip multicast-routing
 +
!
 +
interface Tunnel0
 +
ip address 10.255.254.1 255.255.255.252
 +
ip mtu 1300
 +
ip pim sparse-dense-mode
 +
ip virtual-reassembly
 +
tunnel source Loopback1
 +
tunnel destination 10.255.253.2
 +
!
 +
interface FastEthernet0/1
 +
description HQSW1
 +
ip address 10.255.255.2 255.255.255.252
 +
ip pim sparse-dense-mode
 +
ip nat inside
 +
ip virtual-reassembly
 +
ip ospf network point-to-point
 +
ip ospf dead-interval minimal hello-multiplier 4
 +
duplex auto
 +
speed auto
 +
!
 +
</pre>
 +
[[Category:network]][[Category:CCNP]][[category:students]]
 +
 +
==Verification==
 +
<pre>B1sw1#sh ip mroute
 +
...
 +
(10.1.1.11, 239.0.0.40), 00:11:05/00:02:54, flags: JT
 +
  Incoming interface: FastEthernet0/2, RPF nbr 10.255.255.14
 +
  Outgoing interface list:
 +
    Vlan5, Forward/Sparse, 00:11:05/00:02:48
 +
</pre>
 +
*Vlc is used as a the stream client
 +
<br/>
 +
 +
[[Image:netband-vlc1.JPG|thumb|none|400px|Åben the multicast stream]]
 +
[[Image:netband-vlc2.JPG|thumb|none|400px|Streaming]]
 +
 +
<br/>
 +
==Link==
 +
Use iPerf as the multicast sender and listener
 +
*https://gist.github.com/jayjanssen/5697813

Latest revision as of 21:14, 4 November 2014

Multicast

This page is part of the Netband Project

  • A multicast server is installed on the server HQDC1

Configuration

  • Switch
  • Only configuration from HQSW1 is shown, as the configuration on B1SW1 is identical
ip multicast-routing distributed
!
interface FastEthernet0/24
 description HQrt1
 no switchport
 ip address 10.255.255.1 255.255.255.252
 ip pim sparse-dense-mode
 ip ospf network point-to-point
 ip ospf dead-interval minimal hello-multiplier 4
!
interface Vlan3
 ip address 10.1.1.1 255.255.255.0
 ip pim sparse-dense-mode
!
ip pim rp-address 10.0.0.12
  • Routers
  • Only configuration from HQSRT1 is shown, as the configuration on B1RR1 is identical
ip multicast-routing
!
interface Tunnel0
 ip address 10.255.254.1 255.255.255.252
 ip mtu 1300
 ip pim sparse-dense-mode
 ip virtual-reassembly
 tunnel source Loopback1
 tunnel destination 10.255.253.2
!
interface FastEthernet0/1
 description HQSW1
 ip address 10.255.255.2 255.255.255.252
 ip pim sparse-dense-mode
 ip nat inside
 ip virtual-reassembly
 ip ospf network point-to-point
 ip ospf dead-interval minimal hello-multiplier 4
 duplex auto
 speed auto
!

Verification

B1sw1#sh ip mroute
...
(10.1.1.11, 239.0.0.40), 00:11:05/00:02:54, flags: JT
  Incoming interface: FastEthernet0/2, RPF nbr 10.255.255.14
  Outgoing interface list:
    Vlan5, Forward/Sparse, 00:11:05/00:02:48
  • Vlc is used as a the stream client


Åben the multicast stream
Streaming


Link

Use iPerf as the multicast sender and listener

Retrieved from "http://mars.merhot.dk/w/index.php?title=Netband_Project_-_Multicast&oldid=28498"