Difference between revisions of "TDC Juniper"
From Teknologisk videncenter
m (→Juniper) |
m (→Goodies) |
||
Line 83: | Line 83: | ||
} | } | ||
} | } | ||
+ | } | ||
+ | } | ||
+ | </pre> | ||
+ | IPv6 Default GW | ||
+ | <pre> | ||
+ | |||
+ | [edit routing-options] | ||
+ | root@SRX240# show | ||
+ | rib inet6.0 { | ||
+ | static { | ||
+ | route ::/0 next-hop 2001:16d8:dd85:146::1; | ||
} | } | ||
} | } |
Revision as of 15:34, 5 December 2011
Juniper
- Juniper Basics
- Generel setup
- Generel udvidet setup
- Statisk Routing
- Dynamisk Routing
- Virtual Routers
- Sikkerhed
- RPM
Bilag
Goodies
IS-IS opsætning
[edit protocols isis] rael@SRX240#show interface ge-0/0/0 { level 2 disable; # Som default kører interfaces L1 og L2 så derfor slår vi L2 Hello's fra. } interface ge-0/0/1 { level 2 disable; }
[edit interfaces] rael@SRX240#show interface ge-0/0/0 { unit 0 { family iso; family inet address 10.0.0.1/24; } } lo0 { unit 0 { family inet address 192.168.0.1/32; family iso address 49.0001.1921.6800.0001.00; } }
NetFlow opsætning
interfaces { ge-0/1/0 { unit 0 { family inet { filter { input all; output all; } address 192.168.1.1/24; } } } } firewall { filter all { term all { then { sample; accept; } } } } forwarding-options { sampling { input { family inet { rate 100; } } output { cflowd 192.168.1.100 { port 2000; version 5; } } } }
IPv6 Default GW
[edit routing-options] root@SRX240# show rib inet6.0 { static { route ::/0 next-hop 2001:16d8:dd85:146::1; } }