Difference between revisions of "QinQ Cisco IOS"
From Teknologisk videncenter
m (→QinQ) |
m (→Hardware understøttelse) |
||
Line 21: | Line 21: | ||
==Hardware understøttelse== | ==Hardware understøttelse== | ||
− | *ME-3400G-2CS-A | + | På disse hardware er det testet. |
+ | *ME-3400G-2CS-A(12.2(58)SE2 ME340x-METROIPACCESSK9-M) | ||
*3550 | *3550 |
Revision as of 15:56, 11 January 2012
QinQ
For at aktivere VLAN tagging skriver man i global configuration[1]
vlan dot1q tag native
På interfacet definerer vi at alt trafik skal i vlan 130, men at den indre tag skal bibeholdes, og der skal klistres en ny på.
interface FastEthernet 0/0 switchport access vlan 103 switchport mode dot1q-tunnel
Begrænsninger
Configuring a port as an IEEE 802.1Q tunnel port has these limitations:
- IP routing and fallback bridging are not supported on tunnel ports.
- Tunnel ports do not support IP ACLs.
- If an IP ACL is applied to a trunk port in a VLAN that includes tunnel ports, or if a VLAN map is applied to a VLAN that includes tunnel ports, packets received from the tunnel port are treated as non-IP packets and are filtered with MAC access lists.
- Layer 3 quality of service (QoS) ACLs and other QoS features related to Layer 3 information are not supported on tunnel ports.
For more information about configuring IEEE 802.1Q tunnel ports, see the software configuration guide for this release.
Hardware understøttelse
På disse hardware er det testet.
- ME-3400G-2CS-A(12.2(58)SE2 ME340x-METROIPACCESSK9-M)
- 3550