Difference between revisions of "Raspberry - Getting Started"
From Teknologisk videncenter
m (→Installation) |
m (→Installer div nice-to-have programmer) |
||
| Line 31: | Line 31: | ||
==Installer div nice-to-have programmer== | ==Installer div nice-to-have programmer== | ||
<source lang=bash> | <source lang=bash> | ||
| − | apt-get install iperf nmon bmon htop screen smbclient | + | apt-get install iperf nmon bmon htop screen smbclient parallel |
</source> | </source> | ||
Revision as of 21:26, 11 December 2013
Her vil der komme nogle små fifs til hvordan man starter med at lege med Raspberry Pi'en
Contents
Installation
Find en af de officielle distributioner og smide den på et SD kort.
Eller installer:
Updater firmware
apt-get update
apt-get install git-core
wget http://goo.gl/1BOfJ -O /usr/bin/rpi-update && sudo chmod +x /usr/bin/rpi-update
rpi-update
reboot
Enable IPv6
# enable it on the fly
modprobe ipv6
#Enable it on the next reboot
echo ipv6 >> /etc/modules
Lav et script der viser temperatur og clock
nano /usr/bin/stats
#!/bin/bash
/opt/vc/bin/vcgencmd measure_temp
/opt/vc/bin/vcgencmd measure_clock arm
chmod +x /usr/bin/stats
Installer div nice-to-have programmer
apt-get install iperf nmon bmon htop screen smbclient parallel
Installer XBMC
Følg denne Guide