#
# DHCP Server Configuration file.
#   see /usr/share/doc/dhcp*/dhcpd.conf.sample
#   see dhcpd.conf(5) man page
#
ddns-update-style interim;
ignore client-updates;

subnet 192.168.1.0 netmask 255.255.255.0 {

   # The range of IP addresses the server
   # will issue to DHCP enabled PC clients
   # booting up on the network

   range 192.168.1.100 192.168.1.199;

   # Set the amount of time in seconds that
   # a client may keep the IP address

  default-lease-time 86400;
  max-lease-time 86400;

   # Set the default gateway to be used by
   # the PC clients

   option routers 192.168.1.1;
   # Don't forward DHCP requests from this
   # NIC interface to any other NIC
   # interfaces

   option ip-forwarding off;

   # Set the broadcast address and subnet mask
   # to be used by the DHCP clients

  option broadcast-address 192.168.1.255;
  option subnet-mask 255.255.255.0;

   # Set the NTP server to be used by the
   # DHCP clients

  option ntp-servers 192.168.1.1;

   # Set the DNS server to be used by the
   # DHCP clients

  option domain-name-servers 192.168.1.1;

   # If you specify a WINS server for your Windows clients,
   # you need to include the following option in the dhcpd.conf file:

  option netbios-name-servers 192.168.1.1;

   # You can also assign specific IP addresses based on the clients'
   # ethernet MAC address as follows (Host's name is "laser-printer":

  #host laser-printer {
   #   hardware ethernet 08:00:2b:4c:59:23;
   #  fixed-address 192.168.1.222;
   #}
}
#
# List an unused interface here
#
#subnet 192.168.2.0 netmask 255.255.255.0 {
#}

service dhcpd restart

dhclient -r
dhclient

#!/bin/bash

### chkconfig ###
### BEGIN INIT INFO
# Provides: nat.sh
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Required-Start: $local_fs $network
# Required-Stop: $local_fs $network
# Short-Description: Startup script containing iptables rules
### END INIT INFO

#Enable ip forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward

#Variabels
#INSIDE_NET="192.168.1.0/24"
INTERNAL_PORT="eth2"

EXTERNAL_PORT="eth1"

/sbin/iptables -t nat -A POSTROUTING -o $EXTERNAL_PORT -j MASQUERADE
/sbin/iptables -A FORWARD -i $EXTERNAL_PORT -o $INTERNAL_PORT -m state --state RELATED,ESTABLISHED -j ACCEPT
/sbin/iptables -A FORWARD -i $INTERNAL_PORT -o $EXTERNAL_PORT -j ACCEPT