Difference between revisions of "Cluster der kan alt/Multi Router Traffic Grapher"
From Teknologisk videncenter
(→MRTG) |
|||
Line 52: | Line 52: | ||
Make a configuration file | Make a configuration file | ||
<source lang=cli> | <source lang=cli> | ||
− | + | sudo cfgmaker --global 'WorkDir:/var/www/mrtg' --ifref=name --ifdesc=eth --global 'Options[_]: bits' --output /etc/mrtg.cfg public@localhost | |
</source> | </source> | ||
==Make a scheduled job== | ==Make a scheduled job== | ||
<source lang=cli> | <source lang=cli> | ||
− | + | sudo crontab -e | |
</source> | </source> | ||
Revision as of 10:13, 7 November 2013
Contents
SNMP
IntalL SNMP
sudo apt-get install snmpd
Backup the configuration file:
$ sudo mv /etc/snmp/snmpd.conf /etc/snmp/snmpd.conf.bak
Make a new config file
sudo nano /etc/snmp/snmpd.conf
Insert the following text instead of the original
rocommunity public
syslocation "ColekColek"
syscontact xxxxxx@yahoo.com
com2sec public localhost public
group public v1 public
group public v2c public
group public usm public
view all included .1
access public "" any noauth exact all none none
Ether the snmpd file
$ sudo nano /etc/default/snmpd
Make sure that the file contain these lines
SNMPDRUN=yes
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -g snmp -I -smux -p /var/run/snmpd.pid -c /etc/snmp/snmpd.conf'
TRAPDRUN=yes
SNMPDCOMPAT=yes
Restart SNMPD
$ sudo /etc/init.d/snmpd restart
MRTG
sudo apt-get install mrtg
Make a configuration file
sudo cfgmaker --global 'WorkDir:/var/www/mrtg' --ifref=name --ifdesc=eth --global 'Options[_]: bits' --output /etc/mrtg.cfg public@localhost
Make a scheduled job
sudo crontab -e
Add
*/5 * * * * env LANG=C /usr/bin/mrtg /etc/mrtg.cfg
DONE
You can check MRTG graph on http://localhost/mrtg/ or http://your_ip/mrtg/