Difference between revisions of "EBGP JUNOS Projekt"
From Teknologisk videncenter
m (→Grundlæggende forbindelser) |
m (→Grundlæggende forbindelser) |
||
| Line 5: | Line 5: | ||
**De skal ligge i 10.255.0.X/30 netværkene | **De skal ligge i 10.255.0.X/30 netværkene | ||
**LT interfacet skal have samme unit nummer som .4 oktet i op adressen(10.255.0.2 = lt-0/0/0.2) | **LT interfacet skal have samme unit nummer som .4 oktet i op adressen(10.255.0.2 = lt-0/0/0.2) | ||
| − | *Configurer lo så de passer med <routernummer>x10. og en management adresse(PE'''1''' = Lo0.'''1'''0:10.255.255 | + | *Configurer lo så de passer med <routernummer>x10. og en management adresse(PE'''1''' = Lo0.'''1'''0:10.255.255.'''1'''/32) |
===Konfiguration=== | ===Konfiguration=== | ||
Konfigurer de logiske interfaces og forbind dem | Konfigurer de logiske interfaces og forbind dem | ||
| Line 21: | Line 21: | ||
family inet { | family inet { | ||
address 10.255.0.1/30; | address 10.255.0.1/30; | ||
| + | } | ||
| + | root@SRX240> <input>show configuration interfaces lo0.10</input> | ||
| + | family inet { | ||
| + | address 10.255.255.1/32; | ||
} | } | ||
</source> | </source> | ||
Revision as of 09:27, 5 November 2014
Prøv at konfigurer følgende setup på en Juniper SRX: BGP Demo Setup
Opgave
Grundlæggende forbindelser
- Konfigurer IP Adresser på alle Logical Tunnel interfaces
- De skal ligge i 10.255.0.X/30 netværkene
- LT interfacet skal have samme unit nummer som .4 oktet i op adressen(10.255.0.2 = lt-0/0/0.2)
- Configurer lo så de passer med <routernummer>x10. og en management adresse(PE1 = Lo0.10:10.255.255.1/32)
Konfiguration
Konfigurer de logiske interfaces og forbind dem
root@SRX240> <input>show configuration interfaces lt-0/0/0.2</input>
<notice>encapsulation ethernet;
peer-unit 1;</notice>
family inet {
address 10.255.0.2/30;
}
root@SRX240> <input>show configuration interfaces lt-0/0/0.1</input>
<notice>encapsulation ethernet;
peer-unit 2;</notice>
family inet {
address 10.255.0.1/30;
}
root@SRX240> <input>show configuration interfaces lo0.10</input>
family inet {
address 10.255.255.1/32;
}Opret en virtual router instance og forbind lt interfaces til instancen.
root@SRX240> <input>show configuration routing-instances PE2</input>
instance-type virtual-router;
<notice>interface lt-0/0/0.2;
interface lt-0/0/0.5;
interface lt-0/0/0.22;
interface lo0.20;</notice>Verificering
Kontroller at de virtuelle routere kan pinge hinanden.
root@SRX240> <input>ping 10.255.0.2 routing-instance PE5</input>
PING 10.255.0.2 (10.255.0.2): 56 data bytes
<notice>64 bytes from 10.255.0.2: icmp_seq=0 ttl=64 time=1.132 ms
64 bytes from 10.255.0.2: icmp_seq=1 ttl=64 time=1.068 ms
64 bytes from 10.255.0.2: icmp_seq=2 ttl=64 time=1.012 ms</notice>
^C
--- 10.255.0.2 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max/stddev = 1.012/1.071/1.132/0.049 ms