CCNP 3 Wireless LANs
From Teknologisk videncenter
Contents
- 1 Introducing Wireless LANs
- 2 Describing Wireless LAN Topologies
- 3 Explaining Wireless LAN Technology Standards
- 4 Configuring Cisco WLAN Clients
- 5 Implementing Wireless LANs
- 5.1 Wireless Client Association
- 5.2 Lightweight Access Point Protocol
- 5.3 Describing WLAN Components
- 5.4 Cisco Unified Wireless Network
- 5.5 Aironet Access Points and Bridges
- 5.6 Power over Ethernet
- 5.7 Explaining WLAN Antennas
- 5.8 Multipath Distortion
- 5.9 Definition of a Decibel
- 5.10 Effective Isotropic Radiated Power
- 6 Implementing Wireless LANs
Introducing Wireless LANs
Wireless Data Technologies
Wireless LANs
WLANs and LANs
Describing Wireless LAN Topologies
Typical WLAN Topologies
Roaming through Wireless Cells
Wireless VLAN Support
Wireless Mesh Networking
Explaining Wireless LAN Technology Standards
Unlicensed Frequency Bands
Reflection: Occurs when RF waves bounce off objects (for example, metal or glass surfaces).
Scattering: Occurs when RF waves strike an uneven surface (for example, a rough surface) and are reflected in many directions.
Absorption: Occurs when RF waves are absorbed by objects (for example, walls).
WLAN Regulation and Standardization
IEEE 802.11b Standard
IEEE 802.11a Standard
|
IEEE 802.11g Standard
802.11 Comparison
General Office Wireless LAN Design
WLAN Security
Configuring Cisco WLAN Clients
Cisco 802.11a/b/g WLAN Client Adapters
Gider ikke gennemgå hvordan man trykker Next for at installere en driver
