ITT 2013/Network module 1/Assignment Day 3

Routing

Implement the following setup in Packet Tracer.
Use the WIC interface calles WIC-2T in the 1841 Router
With the following interface configuration:

Router#<input>conf t</input>
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#<input>int se 0/0/0</input>
Router(config-if)#<input>ip add 192.168.1.6 255.255.255.252</input>
Router(config-if)#<input>no shut</input>

Create a static default route pointing to the cloud:

Router(config)#ip route 0.0.0.0 0.0.0.0 192.168.1.17

Implement it using RIPv2

PT Setup

If you need information on configuring basics on Cisco IOS devices read Chapter 2 in the CCNA Routing & Switching online book.
Or look at this slide on Chapter 2

Subnetting

Calculate the missing information until you feel comfortable

• http://tinyurl.com/ipsubnetting