ITT 2013/Network module 1/Assignment Day 12

From Teknologisk videncenter
< ITT 2013‎ | Network module 1
Revision as of 22:18, 28 October 2013 by Rael (talk | contribs) (added Category:CCNAv5 using HotCat)
Jump to: navigation, search

Setup

Configure the following in Packet Tracker

NAT Setup
  1. Configure IP addresses on all routers
  2. Configure IP addresses on all hosts
  3. Configure NAT
    1. Configure inside interface
    2. Configure outside interface
    3. Configure ACL (ip access-list 1 permit 10.0.0.0 0.0.255.255)
    4. Configure dynamic PAT
    5. Configure static PAT/Port forwarding