BO CCNA Course/coursematerials/ACL Basic
From Teknologisk videncenter
Configure the following setup in Packet Tracer
Tasks
- Connect the Routers and end devices in Cisco Packet Tracer as shown in the topology
- Configure hostname and basic setup on all routers.
- Use ppp encapsulation with CHAP on the serial connections
- Configure IP addresses on the serial connections
- Firewall Router should use the first usable IP address in the range
Are all the Routers able to ping there neighbors?
- Configure the LAN interface with the first usable IP address in the range
- Configure the hosts with an IP address in the range
- The Firewall router should use the first usable IP address in the network connected to the internet switch
- Configure the Firewall router with an default gateway pointing towards the ip address of the www.google.com server
- Configure EIGRP on all the routers
- Redistribute the default route into EIGRP
Are all the hosts able to ping each other?
Are all the hosts able to ping the www.google.com server?
- Configure the InternalWeb server
- Enable the web service and create a default page
- Configure the DNS service on the server
- Create www.google.com as a A record pointing to the IP address of the www.google.com server
- Create an A record for <insert company domain here> pointing to the InternalWeb servers IP address
- Configure all the internal hosts to use the InternalWeb server as the DNS server
- Create a web page on the www.google.com server.
Are all the internal hosts able to access the webpage on the www.google.com server using the domain name?