Netband Project - Zone based Firewall(ZFW)

<accesscontrol>NetBand</accesscontrol> This page is part of the Netband Project

Branch router with DMZ

In this exaple the configuration will what you would expect from a branch office with inside and outside interface and a DMZ for local servers. ZFW is not like IOS firewalling with ip inspect, the inspect firewall is a per interface rule firewall where ZFW is a direction firewall with one-to-one, one-to-many or many-to-many.

vlan 2
 name INSIDE
vlan 3
 name OUTSIDE
vlan 4
 name DMZ
!
!
interface vlan 2
 description Inside interface
 ip address 10.0.0.1 255.255.255.0
 zone-member security INSIDE-ZONE
!
interface vlan 3
 description Outside interface
 ip address 80.225.34.13 255.255.255.0
 zone-member security OUTSIDE-ZONE
!
interface vlan 4
 description DMZ interface
 zone-member security DMZ-ZONE
!

HTTP Aplication inspection

parameter-map type regex uri_regex_cm
 pattern ..*cmd.exe.
 pattern ..*sex.
 pattern ..*gambling.
!
class-map type inspect http match-all uri_check_cm
 match  request uri regex uri_regex_cm
!
class-map type inspect match-any INSIDE-OUT-HTTP
 match protocol http
!
policy-map type inspect http uri_check_pm
 class type inspect http uri_check_cm
  reset
 class class-default
!
policy-map type inspect INSIDE-OUT-PMAP
  class type inspect INSIDE-OUT-HTTP
  inspect
  service-policy http uri_check_pm

External links

http://www.cisco.com/en/US/products/sw/secursw/ps1018/products_tech_note09186a00808bc994.shtml
http://www.cisco.com/en/US/docs/ios/sec_data_plane/configuration/guide/sec_zone_polcy_firew.html