Difference between revisions of "CCDP-Campus Viborg/Opgave 3/Gruppe14"

From Teknologisk videncenter
Jump to: navigation, search
(→‎configs)
m
 
(15 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
= Punkter =
+
=== Netværks tegning ===
  
 +
{|
 +
|-
 +
| [[Image:Opgave3.jpg|thumb|left|800px|Netværks tegning]]
 +
|}
  
 +
<br>
  
−
=== IP PLAN ===
+
=== Navngivning ===
  
 +
Vi har valgt at navngive udstyret på følgende måde.
  
 +
De første 2 karakterer viser lokationens navn, dernæst filial nr; så type, og til sidst løbenummer.
  
−
=== Netværks tegning  ===
+
Eksempler på navngivning kan ses nedenfor.
  
 
{|
 
{|
 
|-
 
|-
−
| [[Image:Opgave3.jpg|thumb|left|800px|Netværks tegning]]
+
| [[Image:Navngivning.JPG|thumb|left|800px|Navngivning]]
 
|}
 
|}
  
 +
=== Udstyr  ===
 +
 +
'''Core:'''
 +
Cisco 6509-E x 2
 +
En 6500 vil indeholde:
 +
 +
1x Supervisor Engine 720  -  VS-S720-10G-3CXL
 +
 +
2 x Cisco Catalyst 6500 Series Gigabit Ethernet Interface Module WS-X6748-SFP
 +
 +
1x Cisco Firewall Services Module - WS-SVC-FWM-1-K9
 +
* SC-SVC-FWM-3.2-K9 – Firewall software module 3.2
 +
* FR-SVC-FWM-VC-T4 - 250 virtual firewall licenses for Cisco FWSM Software 3.1 or above
 +
 +
1x Cisco WiSM - WS-SVC-WISM-1-K9
 +
 +
'''Data Center Core/Distribution(collapsed core datacenter):'''
 +
 +
2 x Cisco Catalyst 3750G-48PS-48 Ethernet 10/100/1000 ports with IEEE 802.3af and Cisco prestandard PoE and four SFP uplinks
 +
 +
'''Access (der er 20 access Krydsfelter) 1 krydsfelt vil se således ud:'''
 +
 +
1x Cisco Catalyst 2960S-48FPD-L
 +
 +
1x Cisco Catalyst 2960S-48TD-L
 +
 +
'''Edge:'''
 +
 +
2 x Cisco 2801
 +
 +
2x Firewall ASA5510-SEC-BUN-K9 (en interior FW og en exterior FW) imellem vores DMZ
  
 +
'''WAN:'''
  
−
=== Navngivning ===
+
2 x Cisco 2801
  
 +
'''Filial:'''
 +
 +
1x Cisco 2801
 +
 +
Extra: der skal købes 10GB fibermoduler(SFP) til alle fiberlinks, der skal også IOS på der understøtter BGP, OSPF og hvad vi ellers har med i vores setup
 +
 +
Der skal laves UPS backup strøm til alle vores krydsfelter/core så IP telefoni samt kritiske systemer kører i tilfælde af strømnedbrud
 +
 +
=== IP PLAN  ===
 
{|
 
{|
 +
|[[Image:Ipadr.jpg|thumb|left|800px|]]
 +
|-
 +
|[[Image:Ipadr2.jpg|thumb|left|800px|]]
 +
|-
 +
|[[Image:Ipadr3.jpg|thumb|left|800px|]]
 +
|-
 +
|[[Image:Ipadr4.jpg|thumb|left|800px|]]
 
|-
 
|-
−
| [[Image:Navngivning.JPG‎|thumb|left|800px|Navngivning]]
+
|[[Image:Ipadr5.jpg|thumb|left|800px|]]
 
|}
 
|}
  
  
−
=== Udstyr  ===
 
  
 +
=== configs  ===
 +
 +
===bgp_conf_vi01mp11===
 +
 +
interface loopback0
 +
 +
ip address 192.168.0.2 255.255.255.255
 +
 +
!
 +
 +
interface FastEthernet1/3
 +
 +
description Backbone to VI01MP10
 +
 +
ip address 10.0.10.70 255.255.255.252
 +
 +
!
 +
 +
interface GI1/4
 +
 +
description "MPLS" til Horsens
 +
 +
ip address x.x.x.x x.x.x.x
 +
 +
!
 +
 +
interface GI1/1
 +
 +
description Backbone til VI01CO10
 +
 +
ip address 10.0.10.58 255.255.255.252
 +
 +
!
 +
 +
interface GI1/2
 +
 +
description Backbone til VI01CO11
 +
 +
ip address 10.0.10.50 255.255.255.252
 +
 +
!
 +
 +
router ospf 1
 +
 +
network 10.0.10.70 0.0.0.0 area 0
 +
 +
network 10.0.10.58 0.0.0.0 area 0
 +
 +
network 10.0.10.50 0.0.0.0 area 0
 +
 +
!
 +
 +
router bgp 700
 +
 +
no synchronization
 +
 +
redistribute ospf 1 route-map LAN_Subnets
 +
 +
neighbor 192.168.0.1 remote-as 700
 +
 +
neighbor 192.168.0.1 update source loopback0
 +
 +
neighbor x.x.x.1(ISP) remote-as xxx(ISP)
 +
 +
neighbor x.x.x.1(ISP)update source loopback0
 +
 +
no auto-summary
 +
 +
!
 +
 +
access-list 10 permit 10.0.0.0 0.31.255.255
 +
 +
!
 +
 +
route-map LAN_Subnets permit 10
 +
 +
 +
 +
match ip address 10
 +
 +
set metric 100
 +
 +
 +
 +
 +
 +
===bgp_config_vi01mp10===
 +
 +
 +
 +
interface loopback0
 +
 +
ip address 192.168.0.1 255.255.255.255
 +
 +
!
 +
 +
interface FastEthernet1/3
 +
 +
description Backbone to VI01MP11
 +
 +
ip address 10.0.10.69 255.255.255.252
 +
 +
!
 +
 +
interface GI1/4
 +
 +
description "MPLS" til Horsens
 +
 +
ip address x.x.x.x x.x.x.x
 +
 +
!
 +
 +
interface GI1/1
 +
 +
description Backbone til VI01CO10
 +
 +
ip address 10.0.10.54 255.255.255.252
 +
 +
!
 +
 +
interface GI1/2
 +
 +
description Backbone til VI01CO11
 +
 +
ip address 10.0.10.46 255.255.255.252
 +
 +
!
 +
 +
router ospf 1
 +
 +
network 10.0.10.69 0.0.0.0 area 0
 +
 +
network 10.0.10.54 0.0.0.0 area 0
 +
 +
network 10.0.10.46 0.0.0.0 area 0
 +
 +
!
 +
 +
router bgp 700
 +
 +
no synchronization
 +
 +
redistribute ospf 1 route-map LAN_Subnets
 +
 +
neighbor 192.168.0.2 remote-as 700
 +
 +
neighbor 192.168.0.2 update source loopback0
 +
 +
neighbor x.x.x.2(ISP) remote-as xxx(ISP)
 +
 +
neighbor x.x.x.2(ISP) update source loopback0
 +
 +
no auto-summary
 +
 +
!
 +
 +
access-list 10 permit 10.0.0.0 0.31.255.255
 +
 +
!
 +
 +
route-map LAN_Subnets permit 10
 +
 +
match ip address 10
 +
 +
set metric 100
  
  
−
=== configs  ===
 
  
−
http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfbgp.html http://www.cisco.com/en/US/docs/ios/12_0/np1/configuration/guide/1cospf.html
+
http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfbgp.html  
−
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/configuration/guide/l3_int.html
+
http://www.cisco.com/en/US/docs/ios/12_0/np1/configuration/guide/1cospf.html http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/configuration/guide/l3_int.html

Latest revision as of 12:26, 22 September 2010

Netværks tegning

Netværks tegning


Navngivning

Vi har valgt at navngive udstyret på følgende måde.

De første 2 karakterer viser lokationens navn, dernæst filial nr; så type, og til sidst løbenummer.

Eksempler på navngivning kan ses nedenfor.

Navngivning

Udstyr

Core: Cisco 6509-E x 2 En 6500 vil indeholde:

1x Supervisor Engine 720 - VS-S720-10G-3CXL

2 x Cisco Catalyst 6500 Series Gigabit Ethernet Interface Module WS-X6748-SFP

1x Cisco Firewall Services Module - WS-SVC-FWM-1-K9

  • SC-SVC-FWM-3.2-K9 – Firewall software module 3.2
  • FR-SVC-FWM-VC-T4 - 250 virtual firewall licenses for Cisco FWSM Software 3.1 or above

1x Cisco WiSM - WS-SVC-WISM-1-K9

Data Center Core/Distribution(collapsed core datacenter):

2 x Cisco Catalyst 3750G-48PS-48 Ethernet 10/100/1000 ports with IEEE 802.3af and Cisco prestandard PoE and four SFP uplinks

Access (der er 20 access Krydsfelter) 1 krydsfelt vil se således ud:

1x Cisco Catalyst 2960S-48FPD-L

1x Cisco Catalyst 2960S-48TD-L

Edge:

2 x Cisco 2801

2x Firewall ASA5510-SEC-BUN-K9 (en interior FW og en exterior FW) imellem vores DMZ

WAN:

2 x Cisco 2801

Filial:

1x Cisco 2801

Extra: der skal købes 10GB fibermoduler(SFP) til alle fiberlinks, der skal også IOS på der understøtter BGP, OSPF og hvad vi ellers har med i vores setup

Der skal laves UPS backup strøm til alle vores krydsfelter/core så IP telefoni samt kritiske systemer kører i tilfælde af strømnedbrud

IP PLAN

Ipadr.jpg
Ipadr2.jpg
Ipadr3.jpg
Ipadr4.jpg
Ipadr5.jpg


configs

bgp_conf_vi01mp11

interface loopback0

ip address 192.168.0.2 255.255.255.255

!

interface FastEthernet1/3

description Backbone to VI01MP10

ip address 10.0.10.70 255.255.255.252

!

interface GI1/4

description "MPLS" til Horsens

ip address x.x.x.x x.x.x.x

!

interface GI1/1

description Backbone til VI01CO10

ip address 10.0.10.58 255.255.255.252

!

interface GI1/2

description Backbone til VI01CO11

ip address 10.0.10.50 255.255.255.252

!

router ospf 1

network 10.0.10.70 0.0.0.0 area 0

network 10.0.10.58 0.0.0.0 area 0

network 10.0.10.50 0.0.0.0 area 0

!

router bgp 700

no synchronization

redistribute ospf 1 route-map LAN_Subnets

neighbor 192.168.0.1 remote-as 700

neighbor 192.168.0.1 update source loopback0

neighbor x.x.x.1(ISP) remote-as xxx(ISP)

neighbor x.x.x.1(ISP)update source loopback0

no auto-summary

!

access-list 10 permit 10.0.0.0 0.31.255.255

!

route-map LAN_Subnets permit 10


match ip address 10

set metric 100



bgp_config_vi01mp10

interface loopback0

ip address 192.168.0.1 255.255.255.255

!

interface FastEthernet1/3

description Backbone to VI01MP11

ip address 10.0.10.69 255.255.255.252

!

interface GI1/4

description "MPLS" til Horsens

ip address x.x.x.x x.x.x.x

!

interface GI1/1

description Backbone til VI01CO10

ip address 10.0.10.54 255.255.255.252

!

interface GI1/2

description Backbone til VI01CO11

ip address 10.0.10.46 255.255.255.252

!

router ospf 1

network 10.0.10.69 0.0.0.0 area 0

network 10.0.10.54 0.0.0.0 area 0

network 10.0.10.46 0.0.0.0 area 0

!

router bgp 700

no synchronization

redistribute ospf 1 route-map LAN_Subnets

neighbor 192.168.0.2 remote-as 700

neighbor 192.168.0.2 update source loopback0

neighbor x.x.x.2(ISP) remote-as xxx(ISP)

neighbor x.x.x.2(ISP) update source loopback0

no auto-summary

!

access-list 10 permit 10.0.0.0 0.31.255.255

!

route-map LAN_Subnets permit 10

match ip address 10

set metric 100


http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfbgp.html http://www.cisco.com/en/US/docs/ios/12_0/np1/configuration/guide/1cospf.html http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/configuration/guide/l3_int.html

Retrieved from "http://mars.merhot.dk/w/index.php?title=CCDP-Campus_Viborg/Opgave_3/Gruppe14&oldid=14880"