Difference between revisions of "Galaxy Network - Network Layout"

From Teknologisk videncenter
Jump to: navigation, search
(VLAN Topology)
(Predefined VLAN assocations)
Line 12: Line 12:
  
 
*'''1:''' Not in use; clear from all trunks. This is a Cisco best practice implementation (not required).  
 
*'''1:''' Not in use; clear from all trunks. This is a Cisco best practice implementation (not required).  
*'''45:''' Management VLAN on all switches.  
+
*'''2-99:''' Management VLAN on all switches.  
 
*'''100–399:''' Access layer devices.
 
*'''100–399:''' Access layer devices.
 
*'''400–599:''' Data center devices.
 
*'''400–599:''' Data center devices.
Line 18: Line 18:
 
*'''700–899:''' Reserved for future use.  
 
*'''700–899:''' Reserved for future use.  
 
*'''900–999:''' Point-to-point links between switches (Layer 3).
 
*'''900–999:''' Point-to-point links between switches (Layer 3).
 
  
 
==== VLANs currently in use ====
 
==== VLANs currently in use ====

Revision as of 13:11, 25 May 2009

Network Layout

IP Topology


VLAN Topology


Predefined VLAN assocations

While only a few of these VLANs are actually in use, the VLAN ranges will allow our network to scale almost indefinitely.

  • 1: Not in use; clear from all trunks. This is a Cisco best practice implementation (not required).
  • 2-99: Management VLAN on all switches.
  • 100–399: Access layer devices.
  • 400–599: Data center devices.
  • 600–699: Internet and partner connections.
  • 700–899: Reserved for future use.
  • 900–999: Point-to-point links between switches (Layer 3).

VLANs currently in use

The following VLANs are in use.

  • VLAN 45: Management VLAN used on all switches in the network.
  • VLAN 102: Skywalker Enterprises.
  • VLAN 400: Wireless access.
  • VLAN 401: Wide-Area Network access.
  • VLAN 402: ISDN/PSTN access.

vlan access-map NAME 10 match ip address <telnet access list> action drop vlan access-map 20 match ip address <ssh access list> action forward

switchport mode access (default) N/A (default) no cdp enable udld port disable

interface vlan <management vlan>

switchport trunk allowed vlan remove 1


Interface security

switchport mode access (default) N/A (default) no cdp enable udld port disable spanning-tree portfast spanning-tree portfast bpduguard default

spanning-tree guard root

vtp mode transparent

no mls qos trust {default}

shutdown