Difference between revisions of "RIP JUNOS"

From Teknologisk videncenter
Jump to: navigation, search
m (Created page with "=Setup= Cisco router er forbundet via en GRE tunnel til en SRX100. Netværket hedder 10.255.0.16/30 på tunnellen.<br/> Netværket bag Cisco routeren 10.197.1.0/25 samt de statis...")
 
m (→‎Juniper konfiguration)
Line 35: Line 35:
 
==Juniper konfiguration==
 
==Juniper konfiguration==
 
===RIP===
 
===RIP===
 +
Konfigurationen af rip ligger under protocol rip. Sender version 2 RIP beskeder som multicast, og modtager kun version 2 beskeder.
 +
<source lang=cli>
 +
[edit protocols rip]
 +
root@SRX100# <input>show</input>
 +
send multicast;
 +
receive version-2;
 +
group RIP-GR {
 +
    neighbor gr-0/0/0.20;
 +
}
 +
</source>
 +
Hvis vi kontrollerer route tabellen ser vi ingen lærte rip routes:
 +
<source lang=cli>
 +
[edit protocols rip]
 +
root@SRX100# <input>run show route protocol rip</input>
 +
 +
inet.0: 25 destinations, 25 routes (25 active, 0 holddown, 0 hidden)
 +
+ = Active Route, - = Last Active, * = Both
 +
 +
224.0.0.9/32      *[RIP/100] 00:03:27, metric 1
 +
                      MultiRecv
 +
 +
inet6.0: 19 destinations, 25 routes (19 active, 0 holddown, 0 hidden)
 +
</source>
 +
RIP statistikkerne siger at vi ikke modtager nogle pakker via tunnelen, selv om vi har verificeret Cisco routeren sender.
 +
<source lang=cli>
 +
root@SRX100# run show rip statistics
 +
RIPv2 info: port 520; holddown 120s.
 +
    rts learned  rts held down  rqsts dropped  resps dropped
 +
              0              0              0              0
 +
 +
gr-0/0/0.20:  0 routes learned; 0 routes advertised; timeout 180s; update interval 30s
 +
Counter                        Total  Last 5 min  Last minute
 +
-------                  -----------  -----------  -----------
 +
Updates Sent                        0            0            0
 +
Triggered Updates Sent              0            0            0
 +
Responses Sent                      0            0            0
 +
Bad Messages                        0            0            0
 +
RIPv1 Updates Received              0            0            0
 +
RIPv1 Bad Route Entries            0            0            0
 +
RIPv1 Updates Ignored              0            0            0
 +
<notice>RIPv2 Updates Received              0            0            0</notice>
 +
RIPv2 Bad Route Entries            0            0            0
 +
RIPv2 Updates Ignored              0            0            0
 +
Authentication Failures            0            0            0
 +
RIP Requests Received              0            0            0
 +
RIP Requests Ignored                0            0            0
 +
none                                0            0            0
 +
</source>
 
===Security Zones===
 
===Security Zones===
 +
SRX firewallen kører flow-mode og RIP skal tillades i sikkerheds zonen, GRE interfacet tilhører.<br/>
 +
Zonen her hedder VOICE da den bruges til IPT.
 +
<source lang=cli>
 +
[edit security zones security-zone VOICE]
 +
root@SRX100# <input>show</input>
 +
host-inbound-traffic {
 +
    system-services {
 +
        ping;
 +
    }
 +
    <notice>protocols {
 +
        rip;
 +
    }</notice>
 +
}
 +
</source>
 +
Og straks begynder opdateringerne at trille ind:
 +
<source lang=cli>
 +
root@SRX100# <input>run show rip statistics</input>   
 +
RIPv2 info: port 520; holddown 120s.
 +
    rts learned  rts held down  rqsts dropped  resps dropped
 +
              4              0              0              0
 +
 +
gr-0/0/0.20:  4 routes learned; 0 routes advertised; timeout 180s; update interval 30s
 +
Counter                        Total  Last 5 min  Last minute
 +
-------                  -----------  -----------  -----------
 +
Updates Sent                        0            0            0
 +
Triggered Updates Sent              0            0            0
 +
Responses Sent                      0            0            0
 +
Bad Messages                        0            0            0
 +
RIPv1 Updates Received              0            0            0
 +
RIPv1 Bad Route Entries            0            0            0
 +
RIPv1 Updates Ignored              0            0            0
 +
<notice>RIPv2 Updates Received              2            0            0</notice>
 +
RIPv2 Bad Route Entries            0            0            0
 +
RIPv2 Updates Ignored              0            0            0
 +
Authentication Failures            0            0            0
 +
RIP Requests Received              0            0            0
 +
RIP Requests Ignored                0            0            0
 +
none                                0            0            0
 +
root@SRX100# <input>run show route protocol rip</input>
 +
 +
inet.0: 29 destinations, 29 routes (29 active, 0 holddown, 0 hidden)
 +
+ = Active Route, - = Last Active, * = Both
 +
 +
<notice>10.197.1.0/25      *[RIP/100] 00:01:16, metric 2, tag 0
 +
                    > to 10.255.0.18 via gr-0/0/0.20
 +
87.48.131.50/32    *[RIP/100] 00:01:16, metric 2, tag 0
 +
                    > to 10.255.0.18 via gr-0/0/0.20
 +
87.48.131.54/32    *[RIP/100] 00:01:16, metric 2, tag 0
 +
                    > to 10.255.0.18 via gr-0/0/0.20
 +
87.48.133.100/32  *[RIP/100] 00:01:16, metric 2, tag 0
 +
                    > to 10.255.0.18 via gr-0/0/0.20</notice>
 +
224.0.0.9/32      *[RIP/100] 00:10:44, metric 1
 +
                      MultiRecv
 +
</source>
 +
Men der bliver ikke sendt nogle updates den anden retning
 +
<source lang=cli>
 +
EM565039#show ip route rip
 +
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
 +
      D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
 +
      N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
 +
      E1 - OSPF external type 1, E2 - OSPF external type 2
 +
      i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
 +
      ia - IS-IS inter area, * - candidate default, U - per-user static route
 +
      o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
 +
      + - replicated route, % - next hop override
 +
 +
Gateway of last resort is 93.166.111.101 to network 0.0.0.0
 +
 +
EM565039#<input>debug ip rip</input>
 +
RIP protocol debugging is on
 +
EM565039#
 +
Oct  1 21:22:35.884 UTC+2: RIP: sending v2 update to 224.0.0.9 via Tunnel20 (10.255.0.18)
 +
Oct  1 21:22:35.884 UTC+2: RIP: build update entries
 +
Oct  1 21:22:35.884 UTC+2: 10.197.1.0/25 via 0.0.0.0, metric 1, tag 0
 +
Oct  1 21:22:35.884 UTC+2: 87.48.131.50/32 via 0.0.0.0, metric 1, tag 0
 +
Oct  1 21:22:35.884 UTC+2: 87.48.131.54/32 via 0.0.0.0, metric 1, tag 0
 +
Oct  1 21:22:35.884 UTC+2: 87.48.133.100/32 via 0.0.0.0, metric 1, tag 0
 +
EM565039#
 +
</source>
 
===Routing Policies===
 
===Routing Policies===
 +
Der er endnu ikke oprettet nogle import og export politikker.<br/>
 +
;import:Alt modtaget trafik bliver automatisk sendt til route tabellen. implicit permit
 +
;export:Intet bliver taget fra route tabellen og send til naboer uden en explicit permit. implicit deny
 +
Alle direkte forbundne netværk bliver exporteret hvis de ligger indenfor 10.197.1.0/24 og har en /24 eller længere maske.
 +
<source lang=cli>
 +
[edit policy-options policy-statement RIP-EXPORT]
 +
root@SRX100# <input>show</input>
 +
term 1 {
 +
    from {
 +
        protocol direct;
 +
        route-filter 10.197.1.0/24 orlonger;
 +
    }
 +
    then accept;
 +
}
 +
[edit protocols rip]
 +
root@SRX100# <input>show</input>
 +
send multicast;
 +
receive version-2;
 +
group RIP-GR {
 +
    export RIP-EXPORT;
 +
    neighbor gr-0/0/0.20;
 +
}
 +
</source>
 +
Og SRX'en begynder nu at sende updates
 +
<source lang=cli>
 +
root@SRX100# <input>run show rip statistics</input>   
 +
RIPv2 info: port 520; holddown 120s.
 +
    rts learned  rts held down  rqsts dropped  resps dropped
 +
              4              0              0              0
 +
 +
gr-0/0/0.20:  4 routes learned; 1 routes advertised; timeout 180s; update interval 30s
 +
Counter                        Total  Last 5 min  Last minute
 +
-------                  -----------  -----------  -----------
 +
<notice>Updates Sent                        1            0            0
 +
Triggered Updates Sent              1            0            0</notice>
 +
Responses Sent                      0            0            0
 +
Bad Messages                        0            0            0
 +
RIPv1 Updates Received              0            0            0
 +
RIPv1 Bad Route Entries            0            0            0
 +
RIPv1 Updates Ignored              0            0            0
 +
RIPv2 Updates Received            29          11            3
 +
RIPv2 Bad Route Entries            0            0            0
 +
RIPv2 Updates Ignored              0            0            0
 +
Authentication Failures            0            0            0
 +
RIP Requests Received              0            0            0
 +
RIP Requests Ignored                0            0            0
 +
none                                0            0            0
 +
</source>
 +
Cisco routeren begynder også at modtage opdateringer
 +
<source lang=cli>
 +
Oct  1 21:32:24.909 UTC+2: RIP: received v2 update from 10.255.0.17 on Tunnel20
 +
Oct  1 21:32:24.909 UTC+2:      <notice>10.197.1.128/25</notice> via 0.0.0.0 in 1 hops
 +
EM565039#<input>show ip route rip</input>
 +
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
 +
      D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
 +
      N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
 +
      E1 - OSPF external type 1, E2 - OSPF external type 2
 +
      i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
 +
      ia - IS-IS inter area, * - candidate default, U - per-user static route
 +
      o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
 +
      + - replicated route, % - next hop override
 +
 +
Gateway of last resort is 93.166.111.101 to network 0.0.0.0
 +
 +
      10.0.0.0/8 is variably subnetted, 7 subnets, 3 masks
 +
<notice>R        10.197.1.128/25 [120/1] via 10.255.0.17, 00:00:02, Tunnel20</notice>
 +
EM565039#
 +
</source>
 
{{Source cli}}
 
{{Source cli}}
 
[[Category:Juniper]]
 
[[Category:Juniper]]

Revision as of 21:36, 1 October 2014

Setup

Cisco router er forbundet via en GRE tunnel til en SRX100. Netværket hedder 10.255.0.16/30 på tunnellen.
Netværket bag Cisco routeren 10.197.1.0/25 samt de statiske routes skal sendes til SRX100'eren og 10.197.1.128/25 netværket bag SRX100'eren skal sendes tilbage til Cisco routeren.

Cisco configurationen

Skal tillade det internt 10.197.1.0/25 netværk og nogle statisk konfigurerede host routes på tværs af tunnellen. 

EM565039#<input>show run</input>
router rip
 version 2
 redistribute static
 passive-interface ATM0.34
 network 10.0.0.0
 distribute-list prefix RIP-OUT out
 no auto-summary
!
ip prefix-list RIP-OUT seq 5 deny 0.0.0.0/0
ip prefix-list RIP-OUT seq 10 permit 10.197.0.0/16 le 32
ip prefix-list RIP-OUT seq 20 permit 87.48.0.0/16 ge 32
!

deny 0.0.0.0/0 er lidt dobbelt konfekt med det virker:-)

Verification

Her sikrer vi os at de rigtige netværk bliver sendt til naboen over tunnellen 

EM565039#<input>debug ip rip</input> 
RIP protocol debugging is on
Oct  1 20:56:32.403 UTC+2: RIP: sending v2 update to 224.0.0.9 via Tunnel20 (10.255.0.18)
Oct  1 20:56:32.403 UTC+2: RIP: build update entries
Oct  1 20:56:32.403 UTC+2: 	<notice>10.197.1.0/25 via 0.0.0.0, metric 1, tag 0</notice>
Oct  1 20:56:32.403 UTC+2: 	<notice>87.48.131.50/32 via 0.0.0.0, metric 1, tag 0</notice>
Oct  1 20:56:32.403 UTC+2: 	<notice>87.48.131.54/32 via 0.0.0.0, metric 1, tag 0</notice>
Oct  1 20:56:32.403 UTC+2: 	<notice>87.48.133.100/32 via 0.0.0.0, metric 1, tag 0</notice>

Nu er vi sikker på Cisco enden sender RIP routes så lad os kigge på Juniper enden

Juniper konfiguration

RIP

Konfigurationen af rip ligger under protocol rip. Sender version 2 RIP beskeder som multicast, og modtager kun version 2 beskeder. 

[edit protocols rip]
root@SRX100# <input>show</input> 
send multicast;
receive version-2;
group RIP-GR {
    neighbor gr-0/0/0.20;
}

Hvis vi kontrollerer route tabellen ser vi ingen lærte rip routes: 

[edit protocols rip]
root@SRX100# <input>run show route protocol rip</input> 

inet.0: 25 destinations, 25 routes (25 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

224.0.0.9/32       *[RIP/100] 00:03:27, metric 1
                      MultiRecv

inet6.0: 19 destinations, 25 routes (19 active, 0 holddown, 0 hidden)

RIP statistikkerne siger at vi ikke modtager nogle pakker via tunnelen, selv om vi har verificeret Cisco routeren sender. 

root@SRX100# run show rip statistics 
RIPv2 info: port 520; holddown 120s. 
    rts learned  rts held down  rqsts dropped  resps dropped
              0              0              0              0

gr-0/0/0.20:  0 routes learned; 0 routes advertised; timeout 180s; update interval 30s
Counter                         Total   Last 5 min  Last minute
-------                   -----------  -----------  -----------
Updates Sent                        0            0            0
Triggered Updates Sent              0            0            0
Responses Sent                      0            0            0
Bad Messages                        0            0            0
RIPv1 Updates Received              0            0            0
RIPv1 Bad Route Entries             0            0            0
RIPv1 Updates Ignored               0            0            0
<notice>RIPv2 Updates Received              0            0            0</notice>
RIPv2 Bad Route Entries             0            0            0
RIPv2 Updates Ignored               0            0            0
Authentication Failures             0            0            0
RIP Requests Received               0            0            0
RIP Requests Ignored                0            0            0
none                                0            0            0

Security Zones

SRX firewallen kører flow-mode og RIP skal tillades i sikkerheds zonen, GRE interfacet tilhører.
Zonen her hedder VOICE da den bruges til IPT. 

[edit security zones security-zone VOICE]
root@SRX100# <input>show</input> 
host-inbound-traffic {
    system-services {
        ping;
    }
    <notice>protocols {
        rip;
    }</notice>
}

Og straks begynder opdateringerne at trille ind: 

root@SRX100# <input>run show rip statistics</input>    
RIPv2 info: port 520; holddown 120s. 
    rts learned  rts held down  rqsts dropped  resps dropped
              4              0              0              0

gr-0/0/0.20:  4 routes learned; 0 routes advertised; timeout 180s; update interval 30s
Counter                         Total   Last 5 min  Last minute
-------                   -----------  -----------  -----------
Updates Sent                        0            0            0
Triggered Updates Sent              0            0            0
Responses Sent                      0            0            0
Bad Messages                        0            0            0
RIPv1 Updates Received              0            0            0
RIPv1 Bad Route Entries             0            0            0
RIPv1 Updates Ignored               0            0            0
<notice>RIPv2 Updates Received              2            0            0</notice>
RIPv2 Bad Route Entries             0            0            0
RIPv2 Updates Ignored               0            0            0
Authentication Failures             0            0            0
RIP Requests Received               0            0            0
RIP Requests Ignored                0            0            0
none                                0            0            0
root@SRX100# <input>run show route protocol rip</input> 

inet.0: 29 destinations, 29 routes (29 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

<notice>10.197.1.0/25      *[RIP/100] 00:01:16, metric 2, tag 0
                    > to 10.255.0.18 via gr-0/0/0.20
87.48.131.50/32    *[RIP/100] 00:01:16, metric 2, tag 0
                    > to 10.255.0.18 via gr-0/0/0.20
87.48.131.54/32    *[RIP/100] 00:01:16, metric 2, tag 0
                    > to 10.255.0.18 via gr-0/0/0.20
87.48.133.100/32   *[RIP/100] 00:01:16, metric 2, tag 0
                    > to 10.255.0.18 via gr-0/0/0.20</notice>
224.0.0.9/32       *[RIP/100] 00:10:44, metric 1
                      MultiRecv

Men der bliver ikke sendt nogle updates den anden retning 

EM565039#show ip route rip
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is 93.166.111.101 to network 0.0.0.0

EM565039#<input>debug ip rip</input> 
RIP protocol debugging is on
EM565039#
Oct  1 21:22:35.884 UTC+2: RIP: sending v2 update to 224.0.0.9 via Tunnel20 (10.255.0.18)
Oct  1 21:22:35.884 UTC+2: RIP: build update entries
Oct  1 21:22:35.884 UTC+2: 	10.197.1.0/25 via 0.0.0.0, metric 1, tag 0
Oct  1 21:22:35.884 UTC+2: 	87.48.131.50/32 via 0.0.0.0, metric 1, tag 0
Oct  1 21:22:35.884 UTC+2: 	87.48.131.54/32 via 0.0.0.0, metric 1, tag 0
Oct  1 21:22:35.884 UTC+2: 	87.48.133.100/32 via 0.0.0.0, metric 1, tag 0
EM565039#

Routing Policies

Der er endnu ikke oprettet nogle import og export politikker.

import
Alt modtaget trafik bliver automatisk sendt til route tabellen. implicit permit
export
Intet bliver taget fra route tabellen og send til naboer uden en explicit permit. implicit deny

Alle direkte forbundne netværk bliver exporteret hvis de ligger indenfor 10.197.1.0/24 og har en /24 eller længere maske. 

[edit policy-options policy-statement RIP-EXPORT]
root@SRX100# <input>show</input> 
term 1 {
    from {
        protocol direct;
        route-filter 10.197.1.0/24 orlonger;
    }
    then accept;
}
[edit protocols rip]
root@SRX100# <input>show</input> 
send multicast;
receive version-2;
group RIP-GR {
    export RIP-EXPORT;
    neighbor gr-0/0/0.20;
}

Og SRX'en begynder nu at sende updates 

root@SRX100# <input>run show rip statistics</input>    
RIPv2 info: port 520; holddown 120s. 
    rts learned  rts held down  rqsts dropped  resps dropped
              4              0              0              0

gr-0/0/0.20:  4 routes learned; 1 routes advertised; timeout 180s; update interval 30s
Counter                         Total   Last 5 min  Last minute
-------                   -----------  -----------  -----------
<notice>Updates Sent                        1            0            0
Triggered Updates Sent              1            0            0</notice>
Responses Sent                      0            0            0
Bad Messages                        0            0            0
RIPv1 Updates Received              0            0            0
RIPv1 Bad Route Entries             0            0            0
RIPv1 Updates Ignored               0            0            0
RIPv2 Updates Received             29           11            3
RIPv2 Bad Route Entries             0            0            0
RIPv2 Updates Ignored               0            0            0
Authentication Failures             0            0            0
RIP Requests Received               0            0            0
RIP Requests Ignored                0            0            0
none                                0            0            0

Cisco routeren begynder også at modtage opdateringer 

Oct  1 21:32:24.909 UTC+2: RIP: received v2 update from 10.255.0.17 on Tunnel20
Oct  1 21:32:24.909 UTC+2:      <notice>10.197.1.128/25</notice> via 0.0.0.0 in 1 hops
EM565039#<input>show ip route rip</input> 
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is 93.166.111.101 to network 0.0.0.0

      10.0.0.0/8 is variably subnetted, 7 subnets, 3 masks
<notice>R        10.197.1.128/25 [120/1] via 10.255.0.17, 00:00:02, Tunnel20</notice>
EM565039#
Retrieved from "http://mars.merhot.dk/w/index.php?title=RIP_JUNOS&oldid=28084"