Difference between revisions of "Virtual Router JUNOS"
From Teknologisk videncenter
m (→Verificer) |
m (→Tildel interfaces) |
||
| Line 19: | Line 19: | ||
<source lang=cli> | <source lang=cli> | ||
[edit routing-instances P1] | [edit routing-instances P1] | ||
| − | rael@SRX240# <input>set interface lt0/0/ | + | rael@SRX240# <input>set interface lt0/0/0.1</input> |
[edit routing-instances P1] | [edit routing-instances P1] | ||
| − | rael@SRX240# <input>set interface lt0/0/ | + | rael@SRX240# <input>set interface lt0/0/0.2</input> |
</source> | </source> | ||
| + | |||
=Verificer= | =Verificer= | ||
<source lang=cli> | <source lang=cli> | ||
Revision as of 16:14, 16 October 2014
Beskrivelse
Virtual Routers bruges på Juniper Udstyr til at lave total adskildte netværk inden i den samme kasse[1]. Det er en af de forkskellige typer af Routing Instance JUNOS understøtter.
I de forskellige Virtuelle routere vil routnings tabel, interfaces og tabeller være helt adskidlte.
Følgende skal konfigureres for at bruge virtuelle routere:
- Opret en virtuel router
- Tildel interfaces til den virtuelle router
- Konfigurer routing options for den virtuelle router(optional)
Opret virtuel router
Her oprettes et routing instance af typen virtual router
[edit]
rael@SRX240# <input>set routing-instances P1 instance-type virtual-router</input>
[edit]
rael@SRX240#Tildel interfaces
Her tildeles 2 logiske tunnel interfaces til routeren P1
[edit routing-instances P1]
rael@SRX240# <input>set interface lt0/0/0.1</input>
[edit routing-instances P1]
rael@SRX240# <input>set interface lt0/0/0.2</input>Verificer
[edit routing-instances P1]
rael@SRX240# show
instance-type virtual-router;
interface lt-0/0/0.1;
interface lt-0/0/0.2;
[edit routing-instances P1]
rael@SRX240# <input>commit and-quit</input>
commit complete
Exiting configuration mode
rael@SRX240> show route table P1.inet.0
P1.inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.0.0.0/30 *[Direct/0] 00:01:02
> via lt-0/0/0.1
10.0.0.1/32 *[Local/0] 00:01:02
Local via lt-0/0/0.1
10.0.0.8/30 *[Direct/0] 00:01:02
> via lt-0/0/0.10
10.0.0.10/32 *[Local/0] 00:01:02
Local via lt-0/0/0.10
rael@SRX240>