Difference between revisions of "Virtual Router JUNOS"
From Teknologisk videncenter
m (→Verificer) |
m (→Beskrivelse) |
||
| Line 6: | Line 6: | ||
#Tildel interfaces til den virtuelle router | #Tildel interfaces til den virtuelle router | ||
#Konfigurer routing options for den virtuelle router(optional) | #Konfigurer routing options for den virtuelle router(optional) | ||
| + | =Setup= | ||
| + | Følgende setup blive konfigureret med RIP: | ||
| + | {| | ||
| + | |[[Image:VR Setup.png|800px|left|thumb|Setup]] | ||
| + | |} | ||
| + | |||
=Opret virtuel router= | =Opret virtuel router= | ||
Her oprettes et routing instance af typen virtual router | Her oprettes et routing instance af typen virtual router | ||
Revision as of 16:23, 16 October 2014
Beskrivelse
Virtual Routers bruges på Juniper Udstyr til at lave total adskildte netværk inden i den samme kasse[1]. Det er en af de forkskellige typer af Routing Instance JUNOS understøtter.
I de forskellige Virtuelle routere vil routnings tabel, interfaces og tabeller være helt adskidlte.
Følgende skal konfigureres for at bruge virtuelle routere:
- Opret en virtuel router
- Tildel interfaces til den virtuelle router
- Konfigurer routing options for den virtuelle router(optional)
Setup
Følgende setup blive konfigureret med RIP:
Opret virtuel router
Her oprettes et routing instance af typen virtual router
[edit]
rael@SRX240# <input>set routing-instances P1 instance-type virtual-router</input>
[edit]
rael@SRX240#Tildel interfaces
Her tildeles 2 logiske tunnel interfaces til routeren P1
[edit routing-instances P1]
rael@SRX240# <input>set interface lt0/0/0.1</input>
[edit routing-instances P1]
rael@SRX240# <input>set interface lt0/0/0.2</input>Verificer
P2 er også oprettet og P1 pringer P2 for at kontrollere forbindelserne
[edit routing-instances P1]
rael@SRX240# show
instance-type virtual-router;
interface lt-0/0/0.1;
interface lt-0/0/0.2;
[edit routing-instances P1]
rael@SRX240# <input>commit and-quit</input>
commit complete
Exiting configuration mode
rael@SRX240> <input>show route table P1.inet.0</input>
P1.inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.0.0.0/30 *[Direct/0] 00:01:02
> via lt-0/0/0.1
10.0.0.1/32 *[Local/0] 00:01:02
Local via lt-0/0/0.1
10.0.0.8/30 *[Direct/0] 00:01:02
> via lt-0/0/0.10
10.0.0.10/32 *[Local/0] 00:01:02
Local via lt-0/0/0.10
rael@SRX240> <input>ping routing-instance P1 10.0.0.1</input>
PING 10.0.0.1 (10.0.0.1): 56 data bytes
64 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.817 ms
64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.497 ms
<input>^C</input>
--- 10.0.0.1 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.497/0.657/0.817/0.160 ms
rael@SRX240> <input>ping routing-instance P1 10.0.0.2</input>
PING 10.0.0.2 (10.0.0.2): 56 data bytes
64 bytes from 10.0.0.2: icmp_seq=0 ttl=64 time=24.933 ms
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.088 ms
<input>^C</input>
--- 10.0.0.2 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 1.088/13.011/24.933/11.923 ms