Difference between revisions of "3-tier design/HSRPConfig"
From Teknologisk videncenter
m (Created page with "{{Source cli}}") |
m |
||
| Line 1: | Line 1: | ||
| + | Switch 1 as active | ||
| + | <source lang=cli> | ||
| + | HQD1D1(config)#<input>int vlan 10</input> | ||
| + | HQD1D1(config-if)#<input>ip add 172.16.10.2 255.255.255.0</input> | ||
| + | HQD1D1(config-if)#<input>standby ip 172.16.10.1</input> | ||
| + | HQD1D1(config-if)#<input>standby pri 110</input> | ||
| + | HQD1D1(config-if)#<input>standby preempt</input> | ||
| + | HQD1D1(config-if)#<input>end</input> | ||
| + | <notice>%HSRP-6-STATECHANGE: Vlan10 Grp 0 state Speak -> Standby | ||
| + | |||
| + | %HSRP-6-STATECHANGE: Vlan10 Grp 0 state Standby -> Active</notice> | ||
| + | HQD1D1#<input>show standby brief</input> | ||
| + | P indicates configured to preempt. | ||
| + | | | ||
| + | Interface Grp Pri P State Active Standby Virtual IP | ||
| + | <notice>Vl10 0 110 P Active local 172.16.10.3 172.16.10.1</notice> | ||
| + | HQD1D1# | ||
| + | </source> | ||
| + | |||
| + | Switch 2 as standby | ||
| + | <source lang=cli> | ||
| + | HQD1D2(config)#<input>int vlan 10</input> | ||
| + | HQD1D2(config-if)#<input>ip add 172.16.10.3 255.255.255.0</input> | ||
| + | HQD1D2(config-if)#<input>standby ip 172.16.10.1</input> | ||
| + | HQD1D2(config-if)#<input>standby preempt</input> | ||
| + | <notice>%HSRP-6-STATECHANGE: Vlan10 Grp 0 state Speak -> Standby</notice> | ||
| + | HQD1D2(config-if)#<input>end</input> | ||
| + | HQD1D2#<input>show standby brie</input> | ||
| + | P indicates configured to preempt. | ||
| + | | | ||
| + | Interface Grp Pri P State Active Standby Virtual IP | ||
| + | <notice>Vl10 0 100 P Standby 172.16.10.2 local 172.16.10.1</notice> | ||
| + | HQD1D2# | ||
| + | </source> | ||
{{Source cli}} | {{Source cli}} | ||
Revision as of 09:49, 12 November 2014
Switch 1 as active
HQD1D1(config)#<input>int vlan 10</input>
HQD1D1(config-if)#<input>ip add 172.16.10.2 255.255.255.0</input>
HQD1D1(config-if)#<input>standby ip 172.16.10.1</input>
HQD1D1(config-if)#<input>standby pri 110</input>
HQD1D1(config-if)#<input>standby preempt</input>
HQD1D1(config-if)#<input>end</input>
<notice>%HSRP-6-STATECHANGE: Vlan10 Grp 0 state Speak -> Standby
%HSRP-6-STATECHANGE: Vlan10 Grp 0 state Standby -> Active</notice>
HQD1D1#<input>show standby brief</input>
P indicates configured to preempt.
|
Interface Grp Pri P State Active Standby Virtual IP
<notice>Vl10 0 110 P Active local 172.16.10.3 172.16.10.1</notice>
HQD1D1#Switch 2 as standby
HQD1D2(config)#<input>int vlan 10</input>
HQD1D2(config-if)#<input>ip add 172.16.10.3 255.255.255.0</input>
HQD1D2(config-if)#<input>standby ip 172.16.10.1</input>
HQD1D2(config-if)#<input>standby preempt</input>
<notice>%HSRP-6-STATECHANGE: Vlan10 Grp 0 state Speak -> Standby</notice>
HQD1D2(config-if)#<input>end</input>
HQD1D2#<input>show standby brie</input>
P indicates configured to preempt.
|
Interface Grp Pri P State Active Standby Virtual IP
<notice>Vl10 0 100 P Standby 172.16.10.2 local 172.16.10.1</notice>
HQD1D2#