Difference between revisions of "3-tier design/FRConfig"
From Teknologisk videncenter
m |
m |
||
| Line 8: | Line 8: | ||
ip ospf priority 0 | ip ospf priority 0 | ||
clock rate 2000000 | clock rate 2000000 | ||
| + | B1R1#<input>show frame-relay map</input> | ||
| + | <notice>Serial0/1/0 (up): ip 10.255.0.3 dlci 201, static, | ||
| + | |||
| + | CISCO, status defined, active</notice> | ||
| + | Serial0/1/0 (up): ip 10.255.0.1 dlci 201, dynamic, | ||
| + | broadcast, | ||
| + | CISCO, status defined, active | ||
| + | B1R1#<input>ping 10.255.0.3</input> | ||
| + | |||
| + | Type escape sequence to abort. | ||
| + | Sending 5, 100-byte ICMP Echos to 10.255.0.3, timeout is 2 seconds: | ||
| + | <notice>!!!!!</notice> | ||
| + | Success rate is 100 percent (5/5), round-trip min/avg/max = 4/27/84 ms | ||
| + | |||
| + | B1R1# | ||
</source> | </source> | ||
{{Source cli}} | {{Source cli}} | ||
Latest revision as of 12:17, 12 November 2014
B1R1#<input>show run</input>
interface Serial0/1/0
bandwidth 1000000
ip address 10.255.0.2 255.255.255.0
encapsulation frame-relay
<notice>frame-relay map ip 10.255.0.3 201</notice>
ip ospf priority 0
clock rate 2000000
B1R1#<input>show frame-relay map</input>
<notice>Serial0/1/0 (up): ip 10.255.0.3 dlci 201, static,
CISCO, status defined, active</notice>
Serial0/1/0 (up): ip 10.255.0.1 dlci 201, dynamic,
broadcast,
CISCO, status defined, active
B1R1#<input>ping 10.255.0.3</input>
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.255.0.3, timeout is 2 seconds:
<notice>!!!!!</notice>
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/27/84 ms
B1R1#