Difference between revisions of "DHCPv6 Cisco IOS"

From Teknologisk videncenter
Jump to: navigation, search
m (DHCPv6 other-config-flag)
m (DHCPv6 other-config-flag)
 
(3 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
*Local link DHCPv6 multicast  FF02::1:2
 
*Local link DHCPv6 multicast  FF02::1:2
 
*Entire site DHCPv6 multicast FF05::1:3
 
*Entire site DHCPv6 multicast FF05::1:3
;NOTE:When using multicast remember to enable ipv6 multicast routing
+
;NOTE:When using entire site multicast remember to enable ipv6 multicast routing
 
<source lang=cli>
 
<source lang=cli>
 
ipv6 multicast-routing
 
ipv6 multicast-routing
Line 11: Line 11:
  
 
=DHCPv6 other-config-flag=
 
=DHCPv6 other-config-flag=
Node will autoconfigure its IPv6 address using [[Stateless Autoconfiguration IPv6 Cisco IOS||Stateless Autoconfiguration]]. The '''ipv6 nd other-config-flag''' teels the node to collect remaining setup from DHCPv6- in this case DNS-server IP and domain-name.
+
Node will autoconfigure its IPv6 address using [[Stateless Autoconfiguration IPv6 Cisco IOS|Stateless Autoconfiguration]]. The '''ipv6 nd other-config-flag''' teels the node to collect remaining setup from DHCPv6- in this case DNS-server IP and domain-name.
 
<source lang=cli>
 
<source lang=cli>
ipv6 dhcp pool ROOM308
+
ipv6 unicast-routing
  dns-server 2001:16D8:DD85:B000:20C:29FF:FE84:CC63
+
ipv6 cef
  domain-name netlab.tekkom.dk
+
ipv6 dhcp pool HOMEBOX
 +
  dns-server 2001:4860:4860::8888
 +
dns-server 2001:4860:4860::8844
 +
  domain-name homebox.local
  
 
!
 
!
Line 22: Line 25:
 
  ipv6 enable
 
  ipv6 enable
 
  ipv6 nd other-config-flag
 
  ipv6 nd other-config-flag
  ipv6 dhcp server ROOM308
+
  ipv6 dhcp server HOMEBOX
 
!
 
!
 
</source>
 
</source>
Line 44: Line 47:
 
R1(config-if)#<input>ipv6 dhcp relay destination FF05::1:3</input>
 
R1(config-if)#<input>ipv6 dhcp relay destination FF05::1:3</input>
 
</source>
 
</source>
 +
All Routers must have IPv6 Multicast Routing enabled.
 +
<source lang=cli>
 +
PE2(config)#<input>ipv6 multicast-routing</input>
 +
</source>
 +
 
==Troubleshooting==
 
==Troubleshooting==
 
<source lang=cli>
 
<source lang=cli>

Latest revision as of 13:21, 21 November 2014

Kate.png This article is under development....

This article will be written when the author gets experience using DHCPv6. (Hopefully shortly :-)

DHCPv6 multicast

  • Local link DHCPv6 multicast FF02::1:2
  • Entire site DHCPv6 multicast FF05::1:3
NOTE
When using entire site multicast remember to enable ipv6 multicast routing
ipv6 multicast-routing

DHCPv6 other-config-flag

Node will autoconfigure its IPv6 address using Stateless Autoconfiguration. The ipv6 nd other-config-flag teels the node to collect remaining setup from DHCPv6- in this case DNS-server IP and domain-name.

ipv6 unicast-routing
ipv6 cef
ipv6 dhcp pool HOMEBOX
 dns-server 2001:4860:4860::8888
 dns-server 2001:4860:4860::8844
 domain-name homebox.local

!
interface FastEthernet0/1
 ipv6 address 2001:16D8:DD85:B000::1/64
 ipv6 enable
 ipv6 nd other-config-flag
 ipv6 dhcp server HOMEBOX
!

DHCPv6 Relay agent

On local link

R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination FE80::250:A2FF:FEBF:A056 fastethernet0/1</input>

To global unicast

R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination 2001:16D8:DD85:146::2</input>
R1(config-if)#<input>ipv6 dhcp relay source-interface loopback 0</input>

To Multicast All Site Local DHCPv6 servers

R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination FF05::1:3</input>

All Routers must have IPv6 Multicast Routing enabled.

PE2(config)#<input>ipv6 multicast-routing</input>

Troubleshooting

R1#<input>show ipv6 dhcp pool ROOM308</input>
DHCPv6 pool: ROOM308
  DNS server: 2001:16D8:DD85:B000:20C:29FF:FE84:CC63
  Active clients: 0
R1#<input>terminal monitor</input>
R1#<input>debug ipv6 dhcp database ?</input>
   IPv6 DHCP database debugging is on