Difference between revisions of "3-tier design/Etherchannel"
From Teknologisk videncenter
m |
m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
<source lang=cli> | <source lang=cli> | ||
| − | HQD1D1(config)#<input> | + | HQD1D1(config)#<input>interface range gi 0/1 - 2</input> |
HQD1D1(config-if-range)#<input>channel-group 1 mode active</input> | HQD1D1(config-if-range)#<input>channel-group 1 mode active</input> | ||
HQD1D1(config-if-range)# | HQD1D1(config-if-range)# | ||
| Line 14: | Line 13: | ||
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up | %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up | ||
| − | HQD1D1(config-if-range)#<input> | + | HQD1D1(config-if-range)#<input>interface Port-channel 1</input> |
| − | HQD1D1(config-if)#<input> | + | HQD1D1(config-if)#<input>switchport trunk encapsulation dot1q</input> |
| − | HQD1D1(config-if)#<input> | + | HQD1D1(config-if)#<input>switchport mode trunk</input> |
HQD1D1(config-if)#<input>end</input> | HQD1D1(config-if)#<input>end</input> | ||
| − | HQD1D1#<input>show | + | HQD1D1#<input>show etherchannel summary</input> |
Flags: D - down P - in port-channel | Flags: D - down P - in port-channel | ||
I - stand-alone s - suspended | I - stand-alone s - suspended | ||
| Line 39: | Line 38: | ||
</source> | </source> | ||
<source lang=cli> | <source lang=cli> | ||
| − | HQD1D2(config)#<input> | + | HQD1D2(config)#<input>interface range fastethernet 0/1 - 2</input> |
HQD1D2(config-if-range)#<input>channel-group 1 mode active</input> | HQD1D2(config-if-range)#<input>channel-group 1 mode active</input> | ||
HQD1D2(config-if-range)# | HQD1D2(config-if-range)# | ||
<notice>Creating a port-channel interface Port-channel 1</notice> | <notice>Creating a port-channel interface Port-channel 1</notice> | ||
<input>int po 1</input> | <input>int po 1</input> | ||
| − | HQD1D2(config-if)#<input> | + | HQD1D2(config-if)#<input>switchport trunk encapsulation dot1q</input> |
| − | HQD1D2(config-if)#< | + | HQD1D2(config-if)#<input>switchport mode trunk</input> |
| − | HQD1D2(config-if)#< | + | HQD1D2(config-if)#<input>end</input> |
HQD1D2# | HQD1D2# | ||
| − | HQD1D2#<input>show etherchannel | + | HQD1D2#<input>show etherchannel summary</input> |
Flags: D - down P - in port-channel | Flags: D - down P - in port-channel | ||
I - stand-alone s - suspended | I - stand-alone s - suspended | ||
Latest revision as of 15:19, 2 June 2015
HQD1D1(config)#<input>interface range gi 0/1 - 2</input>
HQD1D1(config-if-range)#<input>channel-group 1 mode active</input>
HQD1D1(config-if-range)#
<notice>Creating a port-channel interface Port-channel 1</notice>
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up
HQD1D1(config-if-range)#<input>interface Port-channel 1</input>
HQD1D1(config-if)#<input>switchport trunk encapsulation dot1q</input>
HQD1D1(config-if)#<input>switchport mode trunk</input>
HQD1D1(config-if)#<input>end</input>
HQD1D1#<input>show etherchannel summary</input>
Flags: D - down P - in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 1
Number of aggregators: 1
Group Port-channel Protocol Ports
------+-------------+-----------+----------------------------------------------
<notice>1 Po1(SD) LACP Gig0/1(P) Gig0/2(P)</notice>
HQD1D1#HQD1D2(config)#<input>interface range fastethernet 0/1 - 2</input>
HQD1D2(config-if-range)#<input>channel-group 1 mode active</input>
HQD1D2(config-if-range)#
<notice>Creating a port-channel interface Port-channel 1</notice>
<input>int po 1</input>
HQD1D2(config-if)#<input>switchport trunk encapsulation dot1q</input>
HQD1D2(config-if)#<input>switchport mode trunk</input>
HQD1D2(config-if)#<input>end</input>
HQD1D2#
HQD1D2#<input>show etherchannel summary</input>
Flags: D - down P - in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 1
Number of aggregators: 1
Group Port-channel Protocol Ports
------+-------------+-----------+----------------------------------------------
<notice>1 Po1(SU) LACP Gig0/1(P) Gig0/2(P)</notice>
HQD1D2#