Difference between revisions of "Cisco basic configuration"
From Teknologisk videncenter
m |
m |
||
Line 7: | Line 7: | ||
Connect a cisco ''Roolover'' cable from the Routers ''Consoleport'' to a COM port on your PC. Start a terminalemulator. I will recommend the terminalemulator [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html putty] | Connect a cisco ''Roolover'' cable from the Routers ''Consoleport'' to a COM port on your PC. Start a terminalemulator. I will recommend the terminalemulator [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html putty] | ||
Start putty and fill out the serial data. Marked with red rings in picture 1. | Start putty and fill out the serial data. Marked with red rings in picture 1. | ||
+ | *BREAK | ||
+ | *password cisco class | ||
+ | *enable | ||
+ | *erase sta | ||
+ | *reload | ||
[[category:cisco]][[category:ccna]] | [[category:cisco]][[category:ccna]] |
Revision as of 08:54, 8 April 2009
In this example we will configure a Cisco 2621XM Router
- fastethernet 0/0 - 192.168.22.1/24
- fastethernet 0/1 - 172.16.0.1/16
- loopback 0/0 - 10.10.10.1/32
- RIP version 2 on both subnets
Connect a cisco Roolover cable from the Routers Consoleport to a COM port on your PC. Start a terminalemulator. I will recommend the terminalemulator putty Start putty and fill out the serial data. Marked with red rings in picture 1.
- BREAK
- password cisco class
- enable
- erase sta
- reload