Difference between revisions of "M-BUS"

Revision as of 14:28, 5 January 2023

	Meter-BUS or short M-BUS which is designed mainly for remote reading of water meter, gas or electricity meters - not to be confused with Smart-BUS or short S-BUS is designed mainly for home automation

Master to slave: 36 Volt = 1 - 24 Volt = 0
Slave to Master: Draws < 1,5 mA = 1 - draws11-20 mA = 0
Baudrate: 300 - 9600
Cable: Two-wire standard telephone cable (JYStY N20.8 mm)
Max cable length: 350 Meter (Lower baud rates up to 1000 Meter - but restricted power not below 12 V max capacitance 180 nF)
Power: Up to 27 Watt through the cable = 0,75 A
Slaves: Up to 250 in a single segment
Repeater: Also called a master and typically is an M-BUS to RS232 converter attached to a host
Plug: No standard
M-BUS slave example: MIKROE-4137 M-BUS SLAVE CLICK
- Transceiver example: TI-TSS721A
M-BUS naster example: MIKROE-3880 M-BUS MASTER CLICK

@@ Line 25: / Line 25: @@
 *https://m-bus.com/  (Good documentation)
 *[https://github.com/rscada/libmbus libmbus is an open source library for the M-bus (Meter-Bus) protocol]
+*[https://github.com/rscada/libmbus/tree/master/mbus libmbus on github] (Newest??)
 **[http://www.rscada.se/libmbus/doc/libmbus-api.pdf libmbus API]
 *[https://stockshed.uk/files/kamstrup/M-Bus%20Master%20-%20Installation%20and%20User%20Guide%20-%20English.pdf Kamstrup M-Bus mater Multiport 250D] (PDF)