Difference between revisions of "Cisco 7940 and 7960 as SIP phone"
From Teknologisk videncenter
m (New page: *To perform a soft reset of the Cisco 7940/7960 phone; hold the *, 6 and <Settings> key at the same time * To help debug SIP connections: **Telnet to the Cisco 7940/7960 phone (You can ...) |
m |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | *To perform a soft reset of the Cisco 7940/7960 phone; hold the *, 6 and <Settings> key at the same time | + | *To perform a soft reset of the Cisco 7940/7960 phone; hold the ''*'', ''6'' and ''<Settings>'' key at the same time |
| + | ::Unlock your phone by pressing ''**#'' (for old firmware) or selecting ''unlock config'' from the ''config menu'' and type in the password (default is ''‘cisco‘'') | ||
* To help debug SIP connections: | * To help debug SIP connections: | ||
**Telnet to the Cisco 7940/7960 phone (You can find the IP address by looking at the network settings on the phone) | **Telnet to the Cisco 7940/7960 phone (You can find the IP address by looking at the network settings on the phone) | ||
| − | **Login using the password you set in the SIPDefault.cnf file - cisco | + | **Login using the password you set in the SIPDefault.cnf file - ''cisco'' |
| − | :::To watch the sip messages, type: debug sip-messages | + | :::To watch the sip messages, type: ''debug sip-messages'' |
| − | :::To turn off, type: tty mon 0 | + | :::To turn off, type: ''tty mon 0'' |
| − | *To see errors in the *.cfg file, type: show status | + | *To see errors in the *.cfg file, type: ''show status'' |
::Note: You will see the following messages and can ignore them… | ::Note: You will see the following messages and can ignore them… | ||
::W351 unprovisioned proxy_emergency | ::W351 unprovisioned proxy_emergency | ||
::W350 unprovisioned proxy_backup | ::W350 unprovisioned proxy_backup | ||
| + | =Links= | ||
| + | *[http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7960g_7940g/sip/7_5/english/administration/guide/sip75AG.pdf Cisco SIP 7.5 adm guide] (Loads PDF ~ 2,6MB) | ||
[[Category:Cisco]][[Category:VoIP]] | [[Category:Cisco]][[Category:VoIP]] | ||
Latest revision as of 07:05, 11 October 2010
- To perform a soft reset of the Cisco 7940/7960 phone; hold the *, 6 and <Settings> key at the same time
- Unlock your phone by pressing **# (for old firmware) or selecting unlock config from the config menu and type in the password (default is ‘cisco‘)
- To help debug SIP connections:
- Telnet to the Cisco 7940/7960 phone (You can find the IP address by looking at the network settings on the phone)
- Login using the password you set in the SIPDefault.cnf file - cisco
- To watch the sip messages, type: debug sip-messages
- To turn off, type: tty mon 0
- To see errors in the *.cfg file, type: show status
- Note: You will see the following messages and can ignore them…
- W351 unprovisioned proxy_emergency
- W350 unprovisioned proxy_backup
Links
- Cisco SIP 7.5 adm guide (Loads PDF ~ 2,6MB)