Difference between revisions of "Multicast IPv6 Address"

From Teknologisk videncenter
Jump to: navigation, search
m
m
 
(5 intermediate revisions by the same user not shown)
Line 9: Line 9:
 
  |CompareIPv4    =  224.0.0.0/4
 
  |CompareIPv4    =  224.0.0.0/4
 
  |Desc1          =  [http://tools.ietf.org/html/rfc4291#section-2.7 rfc4291 section 2.7]
 
  |Desc1          =  [http://tools.ietf.org/html/rfc4291#section-2.7 rfc4291 section 2.7]
|Desc2          = 
 
|Desc3          =  # (Optional)
 
 
  |Explanation    =  These addresses are used to identify multicast groups. They should only be used as destination addresses, never as source addresses.
 
  |Explanation    =  These addresses are used to identify multicast groups. They should only be used as destination addresses, never as source addresses.
 
}}
 
}}
  
=Multicast Address Format=
+
==Multicast Address Format==
 
The IPv6 Multicast addresses contains two fields describing which kind of Multicast it is. Flag and Scope.
 
The IPv6 Multicast addresses contains two fields describing which kind of Multicast it is. Flag and Scope.
 
{|
 
{|
 
|[[Image:Multicast IPv6 format.png|left|350px|Thumb|Format of IPv6 Multicast Address]]
 
|[[Image:Multicast IPv6 format.png|left|350px|Thumb|Format of IPv6 Multicast Address]]
 
|}
 
|}
==Flag Field==
+
===Flag Field===
 
{|
 
{|
 
|-
 
|-
Line 53: Line 51:
 
|}
 
|}
  
==Scope Field==
+
===Scope Field===
 
The Scope field is used to limit the Scope of the Multicast Group.
 
The Scope field is used to limit the Scope of the Multicast Group.
 
{|  class="wikitable" style="text-align:center" border=1
 
{|  class="wikitable" style="text-align:center" border=1
Line 73: Line 71:
 
|-
 
|-
 
|}
 
|}
===Permanent Assigned Multicast Address===
+
====Variable Scope Multicast Addresses====
The "meaning" of a permanently-assigned multicast address is independent of the scope value.  For example, if the "NTP servers group" is assigned a permanent multicast address with a group ID of 101 (hex), then
+
The "meaning" of a Variable Scope or permanently-assigned multicast address is independent of the scope value.  For example, if the "NTP servers group" is assigned a permanent multicast address with a group ID of FF0x::101 (hex), then
 
::FF01::101 means all NTP servers on the same interface (i.e., the same node) as the sender.
 
::FF01::101 means all NTP servers on the same interface (i.e., the same node) as the sender.
 
::FF02::101 means all NTP servers on the same link as the sender.
 
::FF02::101 means all NTP servers on the same link as the sender.
 
::FF05::101 means all NTP servers in the same site as the sender.
 
::FF05::101 means all NTP servers in the same site as the sender.
 
::FF0E::101 means all NTP servers in the Internet.
 
::FF0E::101 means all NTP servers in the Internet.
===Well Known Multicast examples===
+
*See [http://www.iana.org/assignments/ipv6-multicast-addresses/ipv6-multicast-addresses.xml IANA IPv6 Multicast Address Space Registry]
 +
 
 +
====Well Known Multicast examples====
 
{| class="wikitable" style="text-align:left" border=1
 
{| class="wikitable" style="text-align:left" border=1
 
|+  
 
|+  
Line 110: Line 110:
 
2 multicast replies and 0 errors.
 
2 multicast replies and 0 errors.
 
</source>
 
</source>
When pinging FF02::1 - All Nodes on Local-Link - it's seen that there are ten Nodes, including the two Routers from previous example.
+
When pinging FF02::1 - All Nodes on Local-Link - it's seen that there are ten Nodes, including the two Routers from previous example. Using Local-Link address as source.
 
<source lang=cli>
 
<source lang=cli>
 
Campus1#<input>ping FF02::1 source vlan 1 repeat 1</input>
 
Campus1#<input>ping FF02::1 source vlan 1 repeat 1</input>
Line 131: Line 131:
 
10 multicast replies and 0 errors.
 
10 multicast replies and 0 errors.
 
</source>
 
</source>
=RFC's=
+
When pinging with Global Unicast as Source Address, ''some'' of the nodes respond with their Global Unicast Address. Appently
 +
<source lang=cli>
 +
Campus1#<input>ping FF02::1 source 2001:16D8:DD85:139:218:18FF:FE7C:B441 repeat 1</input>
 +
Output Interface: <input>vlan 139</input>
 +
Type escape sequence to abort.
 +
Sending 1, 100-byte ICMP Echos to FF02::1, timeout is 2 seconds:
 +
Packet sent with a source address of 2001:16D8:DD85:139:218:18FF:FE7C:B441
 +
 
 +
Reply to request 0 received from 2001:16D8:DD85:139:250:56FF:FE8B:A, 17 ms
 +
Reply to request 0 received from 2001:16D8:DD85:139:20C:29FF:FE36:45B1, 17 ms
 +
Reply to request 0 received from 2001:16D8:DD85:139:21B:21FF:FE52:917D, 17 ms
 +
Reply to request 0 received from 2001:16D8:DD85:139:216:76FF:FE9F:FEF6, 17 ms
 +
Reply to request 0 received from 2001:16D8:DD85:139:214:5EFF:FE67:614A, 17 ms
 +
Reply to request 0 received from 2001:16D8:DD85:139:20C:29FF:FE4C:C0C, 17 ms
 +
Reply to request 0 received from 2001:16D8:DD85:139:4A5B:39FF:FE5A:A7F7, 17 ms
 +
Reply to request 0 received from 2001:16D8:DD85:139:9221:55FF:FEBC:BD97, 17 ms
 +
Success rate is 100 percent (1/1), round-trip min/avg/max = 17/17/17 ms
 +
8 multicast replies and 0 errors.
 +
</source>
 +
 
 +
==RFC's==
 
[http://tools.ietf.org/html/rfc4291 rfc4291] ''"IP Version 6 Addressing Architecture"'' defines new flags in [http://tools.ietf.org/html/rfc3306 rfc3306] ''"Unicast-Prefix-based IPv6 Multicast Addresses"'' and [http://tools.ietf.org/html/rfc3956 rfc3956] ''"Embedding the Rendezvous Point (RP) Address in an IPv6 Multicast Address"''
 
[http://tools.ietf.org/html/rfc4291 rfc4291] ''"IP Version 6 Addressing Architecture"'' defines new flags in [http://tools.ietf.org/html/rfc3306 rfc3306] ''"Unicast-Prefix-based IPv6 Multicast Addresses"'' and [http://tools.ietf.org/html/rfc3956 rfc3956] ''"Embedding the Rendezvous Point (RP) Address in an IPv6 Multicast Address"''
 
{{Source cli}}
 
{{Source cli}}

Latest revision as of 08:33, 13 June 2011

Multicast
IPv6 Address Type: Multicast
Prefix: ff00::/8
Local Routeable: Yes and No
Global Routeable: Yes and No
Global Unique: Yes and No
Example: FF0E::101
IPv4 Equivalent: 224.0.0.0/4
Described in: rfc4291 section 2.7
Explanation

These addresses are used to identify multicast groups. They should only be used as destination addresses, never as source addresses.


Multicast Address Format

The IPv6 Multicast addresses contains two fields describing which kind of Multicast it is. Flag and Scope.

Format of IPv6 Multicast Address

Flag Field

The flag field consists of four flags.
0 R P T
Flags
Flag Explanation
T

T = 0 indicates a permanently-assigned well-known multicast address assigned by IANA.

T = 1 indicates a non-permanently-assigned ("transient" or "dynamically" assigned) multicast address. See rfc4292

P

P = 0 indicates a multicast address that is not assigned based on the network prefix.

P = 1 indicates a multicast address that is assigned based on the network prefix. See rfc3306

R

R = 0 indicates a multicast address that does not embed the address of the RP

R = 1 indicates a multicast address that embed an RP (Rendezvous Point) See rfc3956

0 The high-order flag is reserved, and must be initialized to 0.

Scope Field

The Scope field is used to limit the Scope of the Multicast Group.

Multicast Address Scope Value in use
Value Scope Explanation
1 Interface-Local Interface-Local scope spans only a single interface on a node and is useful only for loopback transmission of multicast.
2 Link Local Link-Local multicast scope spans the same topological region as the corresponding unicast scope.
4 Admin Local Admin-Local scope is the smallest scope that must be administratively configured, i.e., not automatically derived from physical connectivity or other, non-multicast-related configuration.
5 Site Local Site-Local scope is intended to span a single site.
8 Organization Local Organization-Local scope is intended to span multiple sites belonging to a single organization.
E Global Global span.

Variable Scope Multicast Addresses

The "meaning" of a Variable Scope or permanently-assigned multicast address is independent of the scope value. For example, if the "NTP servers group" is assigned a permanent multicast address with a group ID of FF0x::101 (hex), then

FF01::101 means all NTP servers on the same interface (i.e., the same node) as the sender.
FF02::101 means all NTP servers on the same link as the sender.
FF05::101 means all NTP servers in the same site as the sender.
FF0E::101 means all NTP servers in the Internet.

Well Known Multicast examples

Address Scope Meaning Description
FF01::1 Node All Nodes All nodes on the interface-local scope
FF01::2 Node All Routers All routers on the interface-local scope
FF02::1 Link Local All Nodes All nodes on the local-link scope
FF02::2 Link Local All Routers All routers on the link-local scope
FF05::2 Site All Routers All routers in a site scope

Pinging Multicast Addresses

In the first example below By pinging FF02::2 - All Routers on Local-Link - it's seen from the output below that there are two Routers responding

Campus1#<input>ping FF02::2 source vlan 1 repeat 1</input>
Output Interface: <input>vlan 1</input>
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to FF02::2, timeout is 2 seconds:
Packet sent with a source address of FE80::218:18FF:FE7C:B440

Reply to request 0 received from FE80::128C:CFFF:FE96:F76F, 0 ms
Reply to request 0 received from FE80::219:E7FF:FE51:8C0, 0 ms
Success rate is 100 percent (1/1), round-trip min/avg/max = 0/0/0 ms
2 multicast replies and 0 errors.

When pinging FF02::1 - All Nodes on Local-Link - it's seen that there are ten Nodes, including the two Routers from previous example. Using Local-Link address as source.

Campus1#<input>ping FF02::1 source vlan 1 repeat 1</input>
Output Interface: <input>vlan 1</input>
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to FF02::1, timeout is 2 seconds:
Packet sent with a source address of FE80::218:18FF:FE7C:B440

Reply to request 0 received from FE80::22CF:30FF:FEF0:C81A, 0 ms
Reply to request 0 received from FE80::22CF:30FF:FEF0:C880, 0 ms
Reply to request 0 received from FE80::250:56FF:FE8B:C, 0 ms
Reply to request 0 received from FE80::250:56FF:FE8B:3E, 0 ms
Reply to request 0 received from FE80::250:56FF:FE8B:2, 0 ms
Reply to request 0 received from FE80::250:56FF:FE8B:32, 0 ms
Reply to request 0 received from FE80::250:56FF:FE8B:36, 0 ms
Reply to request 0 received from FE80::207:E9FF:FE40:ABF, 0 ms
Reply to request 0 received from FE80::128C:CFFF:FE96:F76F, 0 ms
Reply to request 0 received from FE80::219:E7FF:FE51:8C0, 0 ms
Success rate is 100 percent (1/1), round-trip min/avg/max = 0/0/0 ms
10 multicast replies and 0 errors.

When pinging with Global Unicast as Source Address, some of the nodes respond with their Global Unicast Address. Appently

Campus1#<input>ping FF02::1 source 2001:16D8:DD85:139:218:18FF:FE7C:B441 repeat 1</input>
Output Interface: <input>vlan 139</input>
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to FF02::1, timeout is 2 seconds:
Packet sent with a source address of 2001:16D8:DD85:139:218:18FF:FE7C:B441

Reply to request 0 received from 2001:16D8:DD85:139:250:56FF:FE8B:A, 17 ms
Reply to request 0 received from 2001:16D8:DD85:139:20C:29FF:FE36:45B1, 17 ms
Reply to request 0 received from 2001:16D8:DD85:139:21B:21FF:FE52:917D, 17 ms
Reply to request 0 received from 2001:16D8:DD85:139:216:76FF:FE9F:FEF6, 17 ms
Reply to request 0 received from 2001:16D8:DD85:139:214:5EFF:FE67:614A, 17 ms
Reply to request 0 received from 2001:16D8:DD85:139:20C:29FF:FE4C:C0C, 17 ms
Reply to request 0 received from 2001:16D8:DD85:139:4A5B:39FF:FE5A:A7F7, 17 ms
Reply to request 0 received from 2001:16D8:DD85:139:9221:55FF:FEBC:BD97, 17 ms
Success rate is 100 percent (1/1), round-trip min/avg/max = 17/17/17 ms
8 multicast replies and 0 errors.

RFC's

rfc4291 "IP Version 6 Addressing Architecture" defines new flags in rfc3306 "Unicast-Prefix-based IPv6 Multicast Addresses" and rfc3956 "Embedding the Rendezvous Point (RP) Address in an IPv6 Multicast Address"