Difference between revisions of "ITT 2012/Activity1"
From Teknologisk videncenter
< ITT 2012
m |
m (→Configuring an interface) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | =Commands= | ||
+ | ==Configuring an interface== | ||
+ | <source lang=cli> | ||
+ | R2><input>enable</input> | ||
+ | Password: | ||
+ | R2#<input>conf t</input> | ||
+ | Enter configuration commands, one per line. End with CNTL/Z. | ||
+ | R2(config)#<input>int fa0/0</input> | ||
+ | R2(config-if)#<input>ip address 192.168.20.1 255.255.255.0</input> | ||
+ | R2(config-if)#<input>no shutdown</input> | ||
+ | R2(config-if)#<input>^Z</input> | ||
+ | R2# | ||
+ | %SYS-5-CONFIG_I: Configured from console by console | ||
+ | |||
+ | R2#<input>wr</input> | ||
+ | Building configuration... | ||
+ | [OK] | ||
+ | R2# | ||
+ | </source> | ||
+ | ==Showing commands== | ||
+ | ===Route table=== | ||
+ | Notice in the route table below that the logical network 192.168.10.0/24 is learned by R2 by the routing protocol RIP. | ||
+ | <source lang=cli> | ||
+ | R2><input>enable</input> | ||
+ | Password: | ||
+ | R2#<input>show ip route</input> | ||
+ | Codes: C - connected, S - static, I - IGRP, <notice>R - RIP</notice>, M - mobile, B - BGP | ||
+ | D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area | ||
+ | N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 | ||
+ | E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP | ||
+ | i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area | ||
+ | * - candidate default, U - per-user static route, o - ODR | ||
+ | P - periodic downloaded static route | ||
+ | |||
+ | Gateway of last resort is not set | ||
+ | |||
+ | <notice>R</notice> 192.168.10.0/24 [120/1] via 192.168.200.9, 00:00:08, FastEthernet0/1 | ||
+ | C 192.168.20.0/24 is directly connected, FastEthernet0/0 | ||
+ | 192.168.200.0/30 is subnetted, 1 subnets | ||
+ | C 192.168.200.8 is directly connected, FastEthernet0/1 | ||
+ | </source> | ||
+ | |||
=R1= | =R1= | ||
<source lang=cli> | <source lang=cli> |
Latest revision as of 11:41, 28 November 2012
Commands
Configuring an interface
R2><input>enable</input>
Password:
R2#<input>conf t</input>
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#<input>int fa0/0</input>
R2(config-if)#<input>ip address 192.168.20.1 255.255.255.0</input>
R2(config-if)#<input>no shutdown</input>
R2(config-if)#<input>^Z</input>
R2#
%SYS-5-CONFIG_I: Configured from console by console
R2#<input>wr</input>
Building configuration...
[OK]
R2#
Showing commands
Route table
Notice in the route table below that the logical network 192.168.10.0/24 is learned by R2 by the routing protocol RIP.
R2><input>enable</input>
Password:
R2#<input>show ip route</input>
Codes: C - connected, S - static, I - IGRP, <notice>R - RIP</notice>, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
<notice>R</notice> 192.168.10.0/24 [120/1] via 192.168.200.9, 00:00:08, FastEthernet0/1
C 192.168.20.0/24 is directly connected, FastEthernet0/0
192.168.200.0/30 is subnetted, 1 subnets
C 192.168.200.8 is directly connected, FastEthernet0/1
R1
Current configuration : 883 bytes
!
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R1
!
!
!
enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0
enable password class
!
ip dhcp excluded-address 192.168.10.1 192.168.10.99
ip dhcp excluded-address 192.168.10.200 192.168.10.254
!
ip dhcp pool R1
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 192.168.10.2
!
spanning-tree mode pvst
!
interface FastEthernet0/0
ip address 192.168.10.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 192.168.200.9 255.255.255.252
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
router rip
version 2
network 192.168.10.0
network 192.168.200.0
!
ip classless
!
no cdp run
!
line con 0
line vty 0 4
password cisco
login
!
end
R2
Current configuration : 671 bytes
!
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R2
!
enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0
enable password class
!
spanning-tree mode pvst
!
interface FastEthernet0/0
ip address 192.168.20.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 192.168.200.10 255.255.255.252
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
router rip
version 2
network 192.168.20.0
network 192.168.200.0
!
ip classless
!
no cdp run
!
line con 0
line vty 0 4
password cisco
login
!
end