Difference between revisions of "Cisco 881W wireless bridge"

From Teknologisk videncenter
Jump to: navigation, search
(Created page with "=Router= =Wireless= <syntax lang=text version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption...")
 
m (→‎Wireless)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
=Router=
 
=Router=
 +
<source lang=text>
  
 +
Current configuration : 1179 bytes
 +
!
 +
! Last configuration change at 13:19:45 UTC Thu Dec 19 2019
 +
version 15.2
 +
service timestamps debug datetime msec
 +
service timestamps log datetime msec
 +
no service password-encryption
 +
!
 +
hostname Router
 +
!
 +
boot-start-marker
 +
boot-end-marker
 +
!
 +
!
 +
!
 +
no aaa new-model
 +
!
 +
!
 +
ip cef
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
no ipv6 cef
 +
!
 +
!
 +
license udi pid C881W-E-K9 sn FCZ175191GK
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
!
 +
interface FastEthernet0
 +
no ip address
 +
!
 +
interface FastEthernet1
 +
no ip address
 +
!
 +
interface FastEthernet2
 +
no ip address
 +
!
 +
interface FastEthernet3
 +
no ip address
 +
!
 +
interface FastEthernet4
 +
no ip address
 +
duplex auto
 +
speed auto
 +
!
 +
interface Wlan-GigabitEthernet0
 +
description Internal switch interface connecting to the embedded AP
 +
no ip address
 +
!
 +
interface wlan-ap0
 +
description Embedded Service module interface to manage the embedded AP
 +
ip address 1.1.1.1 255.255.255.255
 +
!
 +
interface Vlan1
 +
no ip address
 +
!
 +
ip forward-protocol nd
 +
no ip http server
 +
no ip http secure-server
 +
!
 +
!
 +
!
 +
!
 +
!
 +
line con 0
 +
no modem enable
 +
line aux 0
 +
line 2
 +
no activation-character
 +
no exec
 +
transport preferred none
 +
transport input all
 +
stopbits 1
 +
line vty 0 4
 +
login
 +
transport input all
 +
!
 +
scheduler allocate 20000 1000
 +
!
 +
end
 +
</source>
  
 
=Wireless=
 
=Wireless=
−
<syntax lang=text
+
<source lang=text>
 
version 12.4
 
version 12.4
 
no service pad
 
no service pad
Line 73: Line 172:
 
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
 
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
 
bridge 1 route ip
 
bridge 1 route ip
−
!
 
−
!
 
−
banner exec ^CC
 
−
% Password change notice.
 
−
-----------------------------------------------------------------------
 
−
 
−
Default username/password setup on AP is cisco/cisco with privilege level 15.
 
−
It is strongly suggested that you create a new username with privilege level
 
−
15 using the following command for console security.
 
−
 
−
username <myuser> privilege 15 secret 0 <mypassword>
 
−
no username cisco
 
−
 
−
Replace <myuser> and <mypassword> with the username and password you want to
 
−
use. After you change your username/password you can turn off this message
 
−
by configuring  "no banner login" and "no banner exec" in privileged mode.
 
−
 
−
-----------------------------------------------------------------------
 
−
^C
 
−
banner login ^CC
 
−
% Password change notice.
 
−
-----------------------------------------------------------------------
 
−
 
−
Default username/password setup on AP is cisco/cisco with privilege level 15.
 
−
It is strongly suggested that you create a new username with privilege level
 
−
15 using the following command for console security.
 
−
 
−
username <myuser> privilege 15 secret 0 <mypassword>
 
−
no username cisco
 
−
 
−
Replace <myuser> and <mypassword> with the username and password you want to
 
−
use. After you change your username/password you can turn off this message
 
−
by configuring  "no banner login" and "no banner exec" in privileged mode.
 
−
 
−
-----------------------------------------------------------------------
 
−
^C
 
 
!
 
!
 
line con 0
 
line con 0
Line 119: Line 182:
 
cns dhcp
 
cns dhcp
 
end
 
end
−
</syntax>
+
</source>

Latest revision as of 13:46, 19 December 2019

Router

Current configuration : 1179 bytes
!
! Last configuration change at 13:19:45 UTC Thu Dec 19 2019
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
ip cef
!
!
!
!
!
!
no ipv6 cef
!
!
license udi pid C881W-E-K9 sn FCZ175191GK
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0
 no ip address
!
interface FastEthernet1
 no ip address
!
interface FastEthernet2
 no ip address
!
interface FastEthernet3
 no ip address
!
interface FastEthernet4
 no ip address
 duplex auto
 speed auto
!
interface Wlan-GigabitEthernet0
 description Internal switch interface connecting to the embedded AP
 no ip address
!
interface wlan-ap0
 description Embedded Service module interface to manage the embedded AP
 ip address 1.1.1.1 255.255.255.255
!
interface Vlan1
 no ip address
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
!
!
line con 0
 no modem enable
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport input all
 stopbits 1
line vty 0 4
 login
 transport input all
!
scheduler allocate 20000 1000
!
end

Wireless

version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ap
!
logging rate-limit console 9
enable secret 5 $1$o7zB$qlOMOhtgDzBOFn/lIqrCR/
!
no aaa new-model
!
!
dot11 syslog
!
dot11 ssid DataHouse
   vlan 1
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 0 1234567890
!
!
!
username cisco privilege 15 secret 5 $1$HMg/$jbZZPPWzpsTXrtdYKfDhV1
!
!
bridge irb
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption vlan 1 mode ciphers aes-ccm
 !
 ssid DataHouse
 !
 antenna gain 0
 mbssid
 station-role root
!
interface Dot11Radio0.1
 encapsulation dot1Q 1 native
 no ip route-cache
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface GigabitEthernet0
 description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
 no ip address
 no ip route-cache
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
!
interface BVI1
 ip address dhcp client-id GigabitEthernet0
 no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
!
line con 0
 privilege level 15
 login local
 no activation-character
line vty 0 4
 login local
!
cns dhcp
end
Retrieved from "http://mars.merhot.dk/w/index.php?title=Cisco_881W_wireless_bridge&oldid=40257"