Difference between revisions of "Nagios"

From Teknologisk videncenter
Jump to: navigation, search
m (Links)
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Category:Network Management]][[category:linux]][[category:FreeBSD]]
+
= check sensor example program =
[http://www.nagios.org Nagios Homepage]
+
== Script ==
 +
FreeBSD file /usr/local/libexec/nagios/check_humidity
 +
<source lang="perl">
 +
#!/usr/bin/perl
 +
# THIS IS A TEST DUMMY SERVICE
 +
if (scalar(@ARGV) != 2) {
 +
        print "Usage: $0 humidity_minimum humidity_maximum\n";
 +
        exit 3;
 +
}
 +
my $hum_min = shift;
 +
my $hum_max = shift;
  
<pdf>http://nagios.sourceforge.net/docs/nagios-3.pdf</pdf>
+
open(TEMP, "/usr/bin/temp |");
 +
while(my $line = <TEMP>) {
 +
        if ($line =~ m/Humidity.+?(\d+)/ ) {
 +
                my $humidity = $1;
 +
                if ($humidity < $hum_min) {
 +
                  print "Humidity is low under $hum_min% and now $humidity%\n";
 +
                  exit 1;
 +
                }
 +
                if ($humidity > $hum_max) {
 +
                  print "Humidity is high over $hum_max% and now $humidity%\n";
 +
                  exit 2;
 +
                }
 +
                print "Humidity is OK. Now at $humidity%\n";
 +
                exit 0;
 +
        }
 +
}
 +
</source>
  
<pdf>Your_uploaded_document.pdf</pdf>
+
== configuration ==
 +
<source lang="text">
 +
########################################################
 +
# Folgende er tilfojet til filen
 +
# /usr/local/etc/nagios/commands.cfg
 +
# OBS: Paa nogle systemer hedder filen
 +
#          /usr/local/nagios/etc/commands.cfg
 +
define command{
 +
        command_name    check_humidity
 +
        command_line    $USER1$/check_humidity $ARG1
 +
}
 +
########################################################
 +
#Flg. er tilfojet til filen
 +
# /usr/local/etc/nagios/hosts.cfg som er en fil
 +
# der beskriver en host. Filen vedlagt.
 +
define service {
 +
        use router-ping
 +
        host_name localhost
 +
        service_description Humidity
 +
        check_command check_humidity!60 80
 +
}
 +
</source>
 +
<!--
 +
<source lang="text">
 +
define service {
 +
  name                    five            ; The name of this service template
 +
  use                      generic-service  ; Inherit default values from the generic-service definition
 +
  check_period            24x7            ; The service can be checked at any time of the day
 +
  max_check_attempts      4                ; Re-check the service up to 4 times in order to determine its final (hard) state
 +
  normal_check_interval    5                ; Check the service every 5 minutes under normal conditions
 +
  retry_check_interval    1                ; Re-check the service every minute until a hard state can be determined
 +
  contact_groups          router-admins    ; Notifications get sent out to everyone in the 'admins' group
 +
  notification_options    w,u,c,r          ; Send notifications about warning, unknown, critical, and recovery events
 +
  notification_interval    60              ; Re-notify about service problems every hour
 +
  notification_period      24x7            ; Notifications can be sent out at any time
 +
  register                0                ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
 +
}
 +
 
 +
define service {
 +
        use five
 +
        host_name localhost
 +
        service_description Humidity
 +
        check_command check_humidity!60 80
 +
}
 +
</source>
 +
-->
 +
 
 +
= Links =
 +
*[http://www.nagios.org Nagios Homepage]
 +
*[http://nagios.sourceforge.net/docs/nagios-3.pdf Nagios user manual]
 +
[[Category:Network Management]][[category:linux]][[category:FreeBSD]][[Category:Perl]]

Latest revision as of 09:54, 5 November 2009

check sensor example program

Script

FreeBSD file /usr/local/libexec/nagios/check_humidity

#!/usr/bin/perl
# THIS IS A TEST DUMMY SERVICE
if (scalar(@ARGV) != 2) {
        print "Usage: $0 humidity_minimum humidity_maximum\n";
        exit 3;
}
my $hum_min = shift;
my $hum_max = shift;

open(TEMP, "/usr/bin/temp |");
while(my $line = <TEMP>) {
        if ($line =~ m/Humidity.+?(\d+)/ ) {
                my $humidity = $1;
                if ($humidity < $hum_min) {
                  print "Humidity is low under $hum_min% and now $humidity%\n";
                  exit 1;
                }
                if ($humidity > $hum_max) {
                  print "Humidity is high over $hum_max% and now $humidity%\n";
                  exit 2;
                }
                print "Humidity is OK. Now at $humidity%\n";
                exit 0;
        }
}

configuration

########################################################
# Folgende er tilfojet til filen
# /usr/local/etc/nagios/commands.cfg
# OBS: Paa nogle systemer hedder filen
#          /usr/local/nagios/etc/commands.cfg
define command{
        command_name    check_humidity
        command_line    $USER1$/check_humidity $ARG1
}
########################################################
#Flg. er tilfojet til filen
# /usr/local/etc/nagios/hosts.cfg som er en fil
# der beskriver en host. Filen vedlagt.
define service {
        use router-ping
        host_name localhost
        service_description Humidity
        check_command check_humidity!60 80
}

Links