Difference between revisions of "Cisco 7940 and 7960 as SIP phone"
From Teknologisk videncenter
m (New page: *To perform a soft reset of the Cisco 7940/7960 phone; hold the *, 6 and <Settings> key at the same time * To help debug SIP connections: **Telnet to the Cisco 7940/7960 phone (You can ...) |
m |
||
| Line 1: | Line 1: | ||
*To perform a soft reset of the Cisco 7940/7960 phone; hold the *, 6 and <Settings> key at the same time | *To perform a soft reset of the Cisco 7940/7960 phone; hold the *, 6 and <Settings> key at the same time | ||
| + | ::Unlock your phone by pressing **# (for old firmware) or selecting unlock config from the config menu and type in the password (default is ‘cisco‘) | ||
* To help debug SIP connections: | * To help debug SIP connections: | ||
**Telnet to the Cisco 7940/7960 phone (You can find the IP address by looking at the network settings on the phone) | **Telnet to the Cisco 7940/7960 phone (You can find the IP address by looking at the network settings on the phone) | ||
Revision as of 08:34, 27 September 2010
- To perform a soft reset of the Cisco 7940/7960 phone; hold the *, 6 and <Settings> key at the same time
- Unlock your phone by pressing **# (for old firmware) or selecting unlock config from the config menu and type in the password (default is ‘cisco‘)
- To help debug SIP connections:
- Telnet to the Cisco 7940/7960 phone (You can find the IP address by looking at the network settings on the phone)
- Login using the password you set in the SIPDefault.cnf file - cisco
- To watch the sip messages, type: debug sip-messages
- To turn off, type: tty mon 0
- To see errors in the *.cfg file, type: show status
- Note: You will see the following messages and can ignore them…
- W351 unprovisioned proxy_emergency
- W350 unprovisioned proxy_backup