Difference between revisions of "FPGA"
From Teknologisk videncenter
| Line 38: | Line 38: | ||
**[http://www.hdlworks.com/hdl_corner/vhdl_ref/ VHDL 93 Reference Guide] | **[http://www.hdlworks.com/hdl_corner/vhdl_ref/ VHDL 93 Reference Guide] | ||
**[https://www.altera.com/support/software/download/altera_design/quartus_we/dnl-quartus_we.jsp QuartusII webdesign free] | **[https://www.altera.com/support/software/download/altera_design/quartus_we/dnl-quartus_we.jsp QuartusII webdesign free] | ||
| + | Linkene her under kan der købes eval bords!!! | ||
**[http://www.terasic.com www.terasic.com] | **[http://www.terasic.com www.terasic.com] | ||
| + | **[http://www.digikey.dk www.digikey.dk] | ||
[[Category:Elektronik]] | [[Category:Elektronik]] | ||
Revision as of 16:29, 16 October 2010
- Teori
- Ole vildledninger???
- QuartusII Quickguide (Loads PDF file)
- QuartusII Schematic projekt start (Loads PDF file)
- Quartus VHDL projekt start (Loads PDF file)
- Schamtic & VHDL (Loads PDF file)
- VHDL (Loads PDF file)
- Lkaa vejledning
- Hints
- Installation af driver til DE1 board: Vælg denne sti: C:\altera\91\quartus\drivers\usb-blaster
- Eller hente driver fra Altera's hjemmeside samt instruktion: http://www.altera.com/support/software/drivers/dri-index.html
- Clk_divider fra 27MHz til 100Hz (Loads ZIP file)
- Tidsmåler!! uden logik og med 100Hz clk (Loads ZIP file)
- Digital logik (Loads ZIP file)
I have one method of using a counter. The formula for calculating the counter is ( Actual Frequency / required frequency)
use that as the set point for your counter and make use of this code(This IS for 26MHz from 100MHz clock, so the Count value WilL be(100m/26M = 3.)
- if (clock = '1' and clock'event ) then
- if ( count /= 4)
- count := count + 1 ;
- clock_out := clock_out ;
- else
- count := 0 ;
- clock_out := not clock_out ;
- end if;
- end if ;
so for 13MHz the count value will be 7
- Opgaver
- FPGA øvelser (Loads PDF file)
- Links
Linkene her under kan der købes eval bords!!!