Difference between revisions of "Centos Infiniband"
From Teknologisk videncenter
m (→switch status) |
m (→iperf) |
||
| Line 31: | Line 31: | ||
<source lang=cli> | <source lang=cli> | ||
rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt | rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt | ||
| − | wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf. | + | wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm |
rpm -K rpmforge-release-0.5.2-2.el6.rf.*.rpm | rpm -K rpmforge-release-0.5.2-2.el6.rf.*.rpm | ||
rpm -i rpmforge-release-0.5.2-2.el6.rf.*.rpm | rpm -i rpmforge-release-0.5.2-2.el6.rf.*.rpm | ||
Revision as of 05:54, 28 April 2012
switch status
When the service opensm is running
[root@centos2 bin]# <input>iblinkinfo</input>
Switch 0x00066a00e3003007 QLogic 12300 GUID=0x00066a00e3003007:
2 1[ ] ==( 4X 10.0 Gbps Active/ LinkUp)==> 4 1[ ] "QLogic kernel.org driver DKAMA1" ( )
2 2[ ] ==( 4X 10.0 Gbps Active/ LinkUp)==> 5 1[ ] "QLogic kernel.org driver node1" ( )
2 3[ ] ==( 4X 10.0 Gbps Active/ LinkUp)==> 1 1[ ] "QLogic kernel.org driver node2" ( )
2 4[ ] ==( 4X 10.0 Gbps Active/ LinkUp)==> 6 1[ ] "QLogic kernel.org driver (none)" ( )
2 5[ ] ==( 4X 10.0 Gbps Active/ LinkUp)==> 3 1[ ] "QLogic kernel.org driver (none)" ( )
2 6[ ] ==( Down/ Sleep)==> [ ] "" ( )
2 7[ ] ==( Down/ Sleep)==> [ ] "" ( )
2 8[ ] ==( Down/ Sleep)==> [ ] "" ( )
2 9[ ] ==( Down/ Sleep)==> [ ] "" ( )
<notice>...OUTPUT OMITTED...</notice>Node status
[root@centos2 bin]# <input>ibnodes</input>
Ca : 0x0011750000788b2c ports 1 "QLogic kernel.org driver (none)"
Ca : 0x0011750000788c6c ports 1 "QLogic kernel.org driver node2"
Ca : 0x0011750000788c48 ports 1 "QLogic kernel.org driver node1"
Ca : 0x0011750000788b72 ports 1 "QLogic kernel.org driver DKAMA1"
Ca : 0x0011750000788b52 ports 1 "QLogic kernel.org driver (none)"
Switch : 0x00066a00e3003007 ports 36 "QLogic 12300 GUID=0x00066a00e3003007" enhanced port 0 lid 2 lmc 0iperf
Installing iperf you need to add the repository rpmforge-extras[1] which is disabled by default.
rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
rpm -K rpmforge-release-0.5.2-2.el6.rf.*.rpm
rpm -i rpmforge-release-0.5.2-2.el6.rf.*.rpm
yum install iperf