Difference between revisions of "RIP Cisco IOS"
From Teknologisk videncenter
m (→Often used commands) |
m (→Often used commands) |
||
| Line 124: | Line 124: | ||
*show interface fastehernet 1/0 | *show interface fastehernet 1/0 | ||
*copy running-config startup-config | *copy running-config startup-config | ||
| + | ===On the PC's=== | ||
| + | *ipconfig | ||
| + | *ipconfig /release | ||
| + | *ipconfig /renew | ||
== RIP on Cisco equipment == | == RIP on Cisco equipment == | ||
Revision as of 10:35, 25 September 2013
RIP example
Below is a full configuration of the shown network. The commands used to configure RIP are shown in blue.
Configuration of R1
hostname R1
!
ip dhcp excluded-address 192.168.100.1 192.168.100.99
ip dhcp excluded-address 192.168.100.200 192.168.100.255
!
ip dhcp pool LOCATION1
network 192.168.100.0 255.255.255.0
default-router 192.168.100.1
!
interface fastethernet 0/0
no shut
ip address 192.168.100.1 255.255.255.0
!
interface fastethernet 1/0
no shut
ip address 10.10.0.1 255.255.255.252
!
interface fastethernet 2/0
ip address 10.10.0.5 255.255.255.252
!
<notice>router rip
version 2
network 10.0.0.0
network 192.168.100.0</notice>
!Configuration of R2
hostname R2
!
ip dhcp excluded-address 192.168.64.1 192.168.64.99
ip dhcp excluded-address 192.168.64.200 192.168.64.255
!
ip dhcp pool LOCATION2
network 192.168.64.0 255.255.255.0
default-router 192.168.64.1
!
interface fastethernet 0/0
no shut
ip address 192.168.64.1 255.255.255.0
!
interface fastethernet 1/0
no shut
ip address 10.10.0.6 255.255.255.252
!
interface fastethernet 2/0
ip address 10.10.0.9 255.255.255.252
!
<notice>router rip
version 2
network 10.0.0.0
network 192.168.64.0</notice>
!Configuration of R3
hostname R3
!
ip dhcp excluded-address 192.168.72.1 192.168.72.99
ip dhcp excluded-address 192.168.72.200 192.168.72.255
!
ip dhcp pool LOCATION3
network 192.168.72.0 255.255.255.0
default-router 192.168.72.1
!
interface fastethernet 0/0
no shut
ip address 192.168.72.1 255.255.255.0
!
interface fastethernet 1/0
no shut
ip address 10.10.0.10 255.255.255.252
!
<notice>router rip
version 2
network 10.0.0.0
network 192.168.64.0</notice>
!Configuration of R4
hostname R4
!
interface fastethernet 0/0
no shut
ip address 10.10.0.2 255.255.255.252
ip nat inside
!
interface fastethernet 1/0
no shut
ip address dhcp
ip nat outside
!
router rip
version 2
default-information originate
network 10.0.0.0
!
ip nat inside source list 38 interface FastEthernet1/0 overload
!
access-list 38 remark Permit traffic from RFC1918 private net
access-list 38 permit 10.0.0.0 0.255.255.255
access-list 38 permit 172.16.0.0 0.15.255.255
access-list 38 permit 192.168.0.0 0.0.255.255Often used commands
- show ip route
- show ip interfaces brief
- show running-config
- show interface fastehernet 1/0
- copy running-config startup-config
On the PC's
- ipconfig
- ipconfig /release
- ipconfig /renew
RIP on Cisco equipment
RIP is implemented on Ciscos Routers and layer 3 Switches. For in-depth explanation of RIP