Difference between revisions of "OSPF Cisco IOS/NSSA"
From Teknologisk videncenter
m (→R1 & R2) |
m (→R1 & R2) |
||
| Line 76: | Line 76: | ||
! | ! | ||
end | end | ||
| + | |||
R2# | R2# | ||
</source> | </source> | ||
|} | |} | ||
| + | |||
== R3 & R4== | == R3 & R4== | ||
== R5 == | == R5 == | ||
{{Source cli}} | {{Source cli}} | ||
Revision as of 15:00, 18 December 2013
The following topology is configured on GNS3 on Cisco 7200 Routers
The Routers have the following configuration:
R1 & R2
| R1 | R2 |
|---|---|
hostname R1
!
ipv6 unicast-routing
!
interface Loopback0
ipv6 address 2001::1/128
ipv6 ospf 1 area 0
!
interface FastEthernet0/0
ipv6 enable
ipv6 ospf 1 area 0
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
ipv6 enable
ipv6 ospf 1 area 1
!
interface FastEthernet1/0
ipv6 enable
ipv6 ospf 1 area 0
!
!
ipv6 router ospf 1
router-id 0.0.0.1
log-adjacency-changes
area 1 nssa
!
end
R1# |
R2#show run
hostname R2
!
ipv6 unicast-routing
!
interface Loopback0
ipv6 address 2001::2/128
ipv6 ospf 1 area 0
!
interface FastEthernet0/0
ipv6 enable
ipv6 ospf 1 area 0
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
ipv6 enable
ipv6 ospf 1 area 2
!
interface FastEthernet1/0
ipv6 enable
ipv6 ospf 1 area 0
!
ipv6 router ospf 1
router-id 0.0.0.2
log-adjacency-changes
area 2 nssa
!
end
R2# |