Difference between revisions of "Beaglebone Black/Flashing"
From Teknologisk videncenter
m |
m (→Links) |
||
| Line 25: | Line 25: | ||
*[http://beagleboard.org/latest-images/ BeagleBoard Latest Firmware images] | *[http://beagleboard.org/latest-images/ BeagleBoard Latest Firmware images] | ||
*[https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC microSD image to flash the eMMC]t) | *[https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC microSD image to flash the eMMC]t) | ||
| − | *[https://ftdichip.com/ | + | *[https://ftdichip.com/products/ttl-232r-3v3/ FTDI TTL-232R-3V3 kabel] |
[[Category:Beagleboard Black]] | [[Category:Beagleboard Black]] | ||
Revision as of 09:11, 18 October 2023
Flash microSD kort
Ved opstart af BBB er det vigtigt at du
- Ikke placerer boardet på ledende materiale (Metal fx)
- Tilslutter det serielle kabel - (Sort ledning skal vende op imod ethernet stikket)
- Se billede herunder
- Åbner terminalemulator for eksempel putty eller mobaXterm
- Find COM port nummeret og sæt baudRate til 115200
- Boot fra den indbyggede flash. (microSD kort ikke indsat)
- Login
- sudo bash
- Indsæt microSD kort
- Check at filen /dev/mmcblk0 eksisterer (Undgå at lave en fil)
- wget --no-check-certificate -qO- http://mars.tekkom.dk/data/bbb/bone-debian-10.3-iot-armhf-2020-04-06-4gb.img.xz | xzcat | dd bs=10M of=/dev/mmcblk0 status=progress
- shutdown -r 0
- login
- df -h (Check at det er /dev/mmcblk0p1 der er under /)
- kør /opt/scripts/tools/grow_partition.sh
- shutdown -r 0
- check med df -h at ”/” har cirka 8 GB
- Install debian C linux development tools
