Difference between revisions of "MPLS"
From Teknologisk videncenter
m (→Eksempel på MPLS LER router. (Label Edge Router)) |
m (→Learning materials) |
||
Line 126: | Line 126: | ||
default-information originate | default-information originate | ||
! | ! | ||
+ | </source> | ||
+ | |||
+ | = Notater = | ||
+ | Når to routere laver en LDP session mellem naboer bruges højeste Loopback adresse. Derfor skal naboen kende denne adresse. Brug | ||
+ | <source lang="cli> | ||
+ | R3(config)#<input>mpls ldp router-id loopback 0</input> | ||
</source> | </source> | ||
Revision as of 13:32, 11 June 2009
Contents
Multiprotocol Protocol Label Switching
Eksempel på MPLS LER router. (Label Edge Router)
<input>ip cef</input>
!
<input>ip vrf PB
description Kunde: Pengebanken (PB) i Birksund (BKS) : PB-BKS
rd 1100:1
route-target export 1100:1
route-target import 1100:1</input>
!
<input>ip vrf SF
description Kunde: Steel Furniture i Birksund
rd 1000:1
route-target export 1000:1
route-target import 1000:1</input>
!
interface Loopback0
ip address 10.10.10.1 255.255.255.255
ip router isis
!
interface FastEthernet0/0
description Forbindelse til 3550RDB1
bandwidth 10000
ip address 192.168.11.1 255.255.255.0
ip router isis
speed 10
full-duplex
<input>mpls label protocol ldp
tag-switching ip</input>
!
interface FastEthernet0/0.100
description VLAN for Steel Furniture (SF) i Rodborg (RDB)
bandwidth 2000
encapsulation dot1Q 100
<input>ip vrf forwarding SF</input>
ip address 172.24.0.1 255.255.0.0
no ip redirects
no ip proxy-arp
no snmp trap link-status
!
interface FastEthernet0/0.200
description VLAN for Pengebanken (PB) i Rodborg (RDB) : PB-RDB
bandwidth 2000
encapsulation dot1Q 200
<input>ip vrf forwarding PB</input>
ip address 172.28.0.1 255.255.0.0
no ip redirects
no ip proxy-arp
no snmp trap link-status
!
interface Serial0/0
mtu 1508
bandwidth 4000
ip address 192.168.90.1 255.255.255.252
ip router isis
<input>mpls label protocol ldp
tag-switching ip</input>
!
router isis
net 49.0000.0101.3300.1111.00
is-type level-2-only
metric-style wide
!
router bgp 65000
bgp log-neighbor-changes
neighbor 10.10.10.3 remote-as 65000
neighbor 10.10.10.3 update-source Loopback0
!
address-family ipv4
neighbor 10.10.10.3 activate
no auto-summary
no synchronization
exit-address-family
!
<input>address-family vpnv4
neighbor 10.10.10.3 activate
neighbor 10.10.10.3 send-community extended
exit-address-family</input>
!
<input>address-family ipv4 vrf SF
redistribute connected
no auto-summary
no synchronization
exit-address-family</input>
!
<input>address-family ipv4 vrf PB
redistribute connected
no auto-summary
no synchronization
exit-address-family</input>
Eksempel på LSR Router (Label Switch Router)
<input>ip cef</input>
!
interface Loopback0
ip address 10.10.10.2 255.255.255.255
ip router isis
!
interface Serial0/0
mtu 1508
bandwidth 8000
ip address 192.168.90.5 255.255.255.252
ip nat inside
ip router isis
<input>mpls label protocol ldp
tag-switching ip</input>
clock rate 8000000
!
interface Serial0/1
mtu 1508
bandwidth 8000
ip address 192.168.90.2 255.255.255.252
ip nat inside
ip router isis
<input>mpls label protocol ldp
tag-switching ip</input>
clock rate 8000000
!
router isis
net 49.0000.0101.3300.2222.00
is-type level-2-only
metric-style wide
default-information originate
!
Notater
Når to routere laver en LDP session mellem naboer bruges højeste Loopback adresse. Derfor skal naboen kende denne adresse. Brug
R3(config)#<input>mpls ldp router-id loopback 0</input>
Learning materials
Cisco IOS MPLS konfiguration del 1
Cisco IOS MPLS konfiguration del 2